Riso CV1860
Test Mode. List. 2. Imaging & Scanning Test Modes 2
| No. | Data setting | |
|---|---|---|
| 0366 | Edge Emphasis Threshold Offset for Line-Mode printing (for master-making in Duo mode) | |
| Description | Selects the matrix forming the halftone-curve base | |
| Setting | Range : 0 to 7 Unit : 1 Default : 2 |
|
| 0367 | Edge Emphasis Threshold Offset for Line-Mode printing (for master-making in Pencil original mode) | |
| Description | Selects the matrix forming the halftone-curve base | |
| Setting | Range : 0 to 7 Unit : 1 Default : 2 |
|
| 0369 | ABC Edge Emphasis Filter when ABC is activated. | |
| Description | Selects the matrix forming the halftone-curve filter when ABC is activated (Line Mode, Density at auto). | |
| Setting | Range : 0 to 255 Unit : 1 Default : 205 |
|
| 0370 | ABC Edge Emphasis Filter when ABC is activated (under the border-line) | |
| Description | Selects the matrix forming the halftone-curve filter when ABC is activated (Line Mode, Density at auto) for when the border-line is under the setting made by Test Mode No.0369. | |
| Setting | Range : 0 to 7 Unit : 1 Default : 1 |
|
| 0371 | ABC Edge Emphasis Filter when ABC is activated (over the border-line) | |
| Description | Selects the matrix forming the halftone-curve filter when ABC is activated (Line Mode, Density at auto) for when the border-line is over the setting made by Test Mode No.0369. | |
| Setting | Range : 0 to 7 Unit : 1 Default : 3 |
|
| 0372 | ABC Slice Level (super-black) | |
| Description | Sets the slice level when super-black histogram is produced in prescanning. | |
| Setting | Range : -16 to +16 Unit : 1 Default : 0 |
|
| 0380 | AF Horizontal Scan Position Adjust | |
| Description | Adjusts the original horizontal scan position on the AF unit. | |
| Setting | Range : -30 to +30 (-3.0mm to +3.0mm) (+ is to the left ) Unit : 5 (0.5mm) Default : 0 (0mm) |
|
| 0381 | AF Scan Start Position Adjust | |
| Description | Adjusts the original scanning start position on the AF unit (amount of top image omitted) | |
| Setting | Range : -20 to +20 (-2.0mm to +2.0mm) (+ omits more top image of the original and moves the printed image up) Unit : 1 (0.1mm) Default: 0 (0mm) |
|
| 0382 | AF Scanning Speed Adjustment | |
| Description | Adjusts the original scanning speed on the AF unit (Adjust the speed of AF Read Pulse Motor) | |
| Setting | Range : -100 to +100 (-10.0% to +10.0%) ( + elongates the image) Unit : 1 (0.1%) Default : 0 (0%) Rough reference in changing the elongation or shrinkage by 1mm is: A3=0.2%, B4=0.3%, A4=0.3%, Ledger=0.2%, Legal=0.3% |
|
| 0386 | Center dotted line | |
| Description | Adds center dotted line on the prints during master-making or printout from linked printer. (The dotted line is added only when the original is scanned on the AF unit.) Make sure to return the parameter setting back to [ 0 ] after using setting [ 1 ] to make the center line for an adjustment. Otherwise the machine makes the center dotted line on all printings made from AF scanning. |
|
| Setting | 0: No center dotted line (default) 1: Adds center dotted line |
|