Ricoh SPC250SF
Service Mode. MAINTENANCE MODE MENU (MF MODELS) 3
Menu List
| Engine Maintenance | ||
|---|---|---|
| LSU Adjustment | Input 160 bytes setting. |
Character: alphanumeric "0-9", "a-f", "A-F", only valid data can be input. Input length: 160 bytes |
| Trans. Belt Adjust | When you execute "Trans. Belt Adjust", the transfer belt adjustment is done. This calibrates the motor speed to match the length of the new transfer belt. |
|
| Fuser SC Detect | On/Off* | If On, the engine detects SC559. If Off, the engine does not detect "Fusing SC Reset". |
| Color Registration |
The engine will do color registration and density tuning automatically. The printer will warm up automatically after this setting is changed. |
|
| Reset Transfer Unit | Resets the transfer unit life counter. | |
| Reset Fuser Unit | Resets the fusing unit life counter. | |
| Fuser SC Reset | Resets the Fusing related SC. | |
| Reset 2nd Transfer unit |
Resets the 2nd transfer unit (transfer roller) life counter. | |
| Special Mode | DFU (Designed for Factory Use) Do not change this setting. |
|
| Economy Color Print | Tentative Density |
Sets the tentative density of each mode. Text: 100 / 50 / 30 (Default: 100) Image: 100 / 50 / 30 (Default: 50) Graphic:100 / 50 / 30 (Default: 30) |
| Conversion Mode |
Sets the conversion mode for the economy color print. No: No conversion is executed. Color Up Mode: Converts into economy color. The image density is decreased. B&W Up Mode: Converts into Economy Black and white. |
|
| PM Parts Rep Notice |
Sets whether to display the PM parts replacement notice and whether to stop the engine. | |
| 0 | At near end: No Notice / Not Stopped | |
| At life end: Notice "Replace Now" / Not Stopped | ||
| 1 | At near end: No Notice / Not Stopped | |
| At life end: No Notice / Not Stopped | ||
| 2 (default) | At near end: Notice / Not Stopped | |
| At life end: Notice "Replace Now" / Not Stopped | ||
| 3 | At near end: Notice "Replace Soon" / Not Stopped | |
| At life end: Notice "Replace Now" / Stopped | ||
| Scan Maintenance | ||
|---|---|---|
| Mono Compression |
Sets the monochrome compression type for scanning. MH (Default)/ MR/ MMR |
|
| Registration Adjust |
ADF Main Reg. | Adjusts the ADF Scan main-scan registration. [-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step] |
| ADF Sub Reg. | Adjusts the ADF Scan sub-scan registration. [-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step] |
|
| Flatbed Main Reg. |
Adjusts the Flatbed Scan main-scan registration. [-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step] | |
| Flatbed Sub Reg. |
Adjusts the Flatbed Scan sub-scan registration. [-1.0 to 1.5 / 0 (Default)/ 0.1 mm/step] |
|
| Size Adjust | ADF Main Reg. | Adjusts the ADF Scan main-scan magnification. [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] |
| ADF Sub Reg. | Adjusts the ADF Scan sub-scan magnification. [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] |
|
| Flatbed Main Reg. |
Adjusts the Flatbed Scan main-scan magnification. [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] |
|
| Flatbed Sub Reg. |
Adjusts the Flatbed Scan sub-scan magnification. [-0.9 to 0.9 / 0 (Default)/ 0.1 %/step] |
|