Ricoh SPC250SF
Service Mode. MAINTENANCE MODE MENU (MF MODELS) 1
Menu List
| Display Info | ||
|---|---|---|
| Model Name | Displays the Model Name, Depends on Engine Firmware Settings |
|
| FW Version | CTL FW Version | Displays the Firmware Version |
| FAX FW Version | Displays the Facsimile Firmware Version. (M203 doesn't support this) |
|
| Engine FW Version |
Displays the Engine Firmware Version | |
| Counter | Printer Counter | Displays the following counters of the printer engine. Total Page/ Color Image/ Black Image |
| Scanner Counter | Displays the sum total of scanner counters for each mode. Total Page/ Black Page/ Color Page / ADF Used |
|
| Jam Counter | Displays the number of paper jams at each location. Total/ ADF/ Printer Output Bin/ Internal/ Tray1 / Tray2 |
|
| Coverage | Displays the number of paper misfeeds with tray 1 or tray 2. Coverage1 (Tray 1)/ Coverage2 (Tray2) |
|
| Print Reports | |
|---|---|
| G3 Protocol dump list | G3 protocol dump of the latest communication is printed. (M203 doesn't support this) Off (Default)/ Error/ On |
| Engine Maintenance | ||
|---|---|---|
| Toner Limit | Text | Determines the maximum amount of ink/toner you can use in any area of your text. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] |
| Graphic | Determines the maximum amount of ink/toner you can use in any area of your graphic. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] |
|
| Image | Determines the maximum amount of ink/toner you can use in any area of your image. This is where you are controlling exactly how much ink will be used during printing. [200 to 400 / 250 (Default)/ 10/step] |
|
| PnP Name | NA Model: RICOH/ 'nul' EU Model: RICOH/ NRG/ LANIER ASIA Model: RICOH/ LANIER China Model: RICOH [0x00 to 0x7F / - / -] |
|
| Destination | Sets the destination and updates the engine setting. DOM/ NA (Default)/ EU/ CHN/ TAIWAN/ ASIA / LA |
|
| 2nd Transfer Fuser Temp. |
Media Type | Sets the Media type. Plain paper, Thick Paper 2, Middle Thick Paper, Thick Paper 1, Recycled Paper, Color Paper, Letterhead, Preprinted Paper, Prepunched Paper, Label Paper, Bond Paper, Cardstock, Envelope, Thick Post, Thin Paper |
| 2nd Transfer Front |
Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) /1 я A/step] |
|
| 2nd Transfer Back |
Adjusts the transfer roller current, based on the default value. [-15 to 15 / 0 (Default) /1 я A/step] |
|
| Fuser Temperature |
Adjusts the temperature of the fusing unit, based on the default value. [-30 to 0 / 0 (Default) / 2°C/step] |
|
| Registration | Horiz. Tray1 | Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
| Vert.Tray1 | Adjusts the vertical registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
|
| Horiz.Tray2 | Adjusts the horizontal registration for tray 2. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
|
| Vert.Tray2 | Adjusts the vertical registration for tray 2. If the machine settings are reset to the factory defaults, this value does not change. [-15 to 15 / 0 (Default) / 1 mm/step] |
|