Ricoh SP220SNw
Maintenance. Reports
Configuration Page & Maintenance Page (OP-P2/MF2 only)
The configuration page and maintenance page have information about the machine's status. Check them when doing machine maintenance.
To print the configuration page and maintenance page
Machines with LCD keypad operation panel: Press "User Tools" > "Print List/Report" > "Configuration Page" / ”Maintenance Page”
Others: Start SOM > User Tools > List/Test Print > Configuration Page / Maintenance Page
Total Counter
Total Counter:
The total counter is incremented by the "main board" each time the board issues a print command to the engine.
The value is calculated as follows:
Total counter = Copier counter + Printer counter + FAX counter + Reports print
Application Counters:
Application counters exist for each individual primary machine function (Copier, Printer, Fax, etc.), and are incremented by the "main board" each time the board issues a print request for the function in question.
• The total counter can’t be cleared. But the application counters can be cleared by executing ”Factory Default" in maintenance mode.
Other Reports
Other reports in "Print List/Report"
- Fax Journal Prints a fax transmission and reception journal for the last 50 jobs.
- TX Standby File List Prints a list of fax jobs remaining in the machine's memory to be printed, sent, or forwarded.
- Quick Dial Destination List
- Fax Speed Dial Destination List
- Scanner Destinations List
- Scanner Journal Prints a scanner journal for the last 100 Scan to E-mail, Scan to FTP, and Scan to Folder transmissions.
- PCL Font List
Test Page
Print the test pages for checking image problem.
To Print the Test Page
To print the configuration page:
• Machines with LCD keypad operation panel: Press "User Tools" > "Print List/Report" > "Test Page"
• Others: Start SOM > User Tools > List/Test Print > Test Page
Test Pattern Printing (OP-P2/MF2 only)
Print the test patterns (Checker flag/ Grid pattern/ Trimming pattern) for checking image problem.
To Print the Test Pattern
To print the test patterns, enter the maintenance Mode from operation panel or SOM, select "Test Pattern".