Ricoh MPC3001
Troubleshooting. Jam Codes 2
SP7-504 shows how many jams occurred at each location.
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7504 55 | - | - | - |
| 7504 56 | - | - | - |
| 7504 57 | Regist Sensor | Registration sensor does not turn off. | B |
| 7504 58 | LCT Sensor | LCT sensor does not turn off. | U |
| 7504 59 | - | - | |
| 7504 60 | Exit Sensor | Paper exit sensor does not turn off. | C |
| 7504 61 | Relay Exit Sensor | Tray exit sensor (bridge unit) does not turn off. | D |
| 7504 62 | Relay Sensor | Relay sensor (bridge unit) does not turn off. | D |
| 7504 63 | - | - | - |
| 7504 64 | Junction Gate Feed: OFF | Junction gate jam sensor does not turn off. | C |
| 7504 65 | Duplex Exit Sensor | Duplex exit sensor does not turn off. | Z |
| 7504 66 | Duplex Entrance: OFF (In) | Duplex entrance sensor does not turn off. | Z |
| 7504 67 | Duplex Entrance: OFF (Out) | Duplex entrance sensor does not turn off after paper has passed this sensor. | Z |
| 7504 68 | - | - | - |
| 7504 100 | Finisher Entrance (B408) | Paper does not reach to the entrance sensor or stay at the entrance sensor. | R1-R2 |
| 7504 101 | Finisher Shift Tray Exit (B408) | Paper does not reach to the lower tray exit sensor or stay at the lower tray exit sensor. | R1-R2 |
| 7504 102 | Finisher Staple (B408) | Paper does not reach to the staple tray entrance sensor or stay at the staple tray entrance sensor. | R3-R5 |
| 7504 103 | Finisher Exit (B408) | Lower tray exit sensor does not detect paper after the stack feed-out belt has fed paper. Lower tray exit sensor still detects paper after the stack feed-out belt has returned to the home position. |
R3-R5 |
| 7504 104 | - | - | - |
| 7504 105 | Finisher Tray Lift Motor (B408) | Stack height sensor does not detect paper after the lower tray has lifted up. Stack height sensor still detects paper after the lower tray has lifted down. |
R1-R2 |
| 7504 106 | Finisher Jogger Motor (B408) | Jogger fence HP sensor does not turn off after the jogger fence has moved from its home position. Jogger fence HP sensor does not turn on after the jogger fence has returned to its home position. |
R3-R5 |
| 7504 107 | Finisher Shift Motor (B408) | Shift roller HP sensor does not turn off after the shift roller has moved from its home position. Shift roller HP sensor does not turn on after the shift roller has returned to its home position. |
R1-R2 |
| 7504 108 | Finisher Staple Motor (B408) | Stapler HP sensor does not turn off after the stapler has moved from its home position. Stapler HP sensor does not turn on after the stapler has returned to its home position. |
R3-R5 |
| 7504 109 | Finisher Exit Motor (B408) | Stack feed-out belt HP sensor does not turn off after the stack feed-out belt has moved from its home position. Stack feed-out belt HP sensor does not turn on after the stack feed-out belt has returned to its home position. |
R3-R5 |
| 7504 191 | Finisher Entrance: EUP (B804/B805) | Paper does not reach the finisher entrance sensor or stays at the finisher entrance sensor. | R1-R4 |
| 7504 192 | Finisher Proof Exit: EUP (B804/B805) | Paper does not reach the proof tray exit sensor or stays at the proof tray exit sensor. | R1-R4 |
| 7504 193 | Finisher Shift Tray Exit: EUP(B804/B805) |
Paper does not reach the upper tray exit sensor or stays at the upper tray exit sensor. | R1-R4 |