Ricoh MPC2800
Service Program Mode. 01 How to Enter
Make sure that the data-in LED ( ) is not on before you go into the SP mode. This LED indicates that some data is coming to the machine. When the LED is on, wait for the copier to process the data.
Enabling and Disabling Service Program Mode
The Service Program Mode is for use by service representatives only. If this mode is used by anyone other than service representatives for any reason, data might be deleted or settings might be changed. In such case, product quality cannot be guaranteed any more.
Entering SP Mode
- Press the "Clear Mode" key.
- Use keypad to enter "107" ( ).
- Hold down "Clear/Stop" for 3 seconds at least.
- Enter the Service Mode.
Exiting SP Mode
Press "Exit" on the LCD twice to return to the copy window.