Ricoh MPC2050

SP7-504 shows how many jams occurred at each location.

Mainframe

Jam Code SP	Display	Description	LCD Display
7504 243	Stapler Motor	The mainframe detects the lock signal from the staple motor of the internal finisher.	R1, R2
7504 244	Jogger Motor	The mainframe detects the lock signal from the front or rear jogger motor of the internal finisher.	R1, R2
7504 245	Pick-Up Roller Lift Motor	The mainframe detects the lock signal from the pick-up roller contact motor of the internal finisher.	R1, R2
7504 246	Stapler Unit Drive Motor	The mainframe detects the lock signal from the stapler unit movement motor of the punch unit.	R1, R2
7504 247	Output Tray Motor	The mainframe detects the lock signal from the feed motor of the internal finisher.	R1, R2
7504 248	Belt Lift Solenoid	The mainframe detects the belt lift solenoid error from the internal finisher.	R1, R2
7504 249	Finisher Fan	The mainframe detects the finisher fan error from the internal finisher.	R1, R2
7504 250	Punch Motor	The mainframe detects the lock signal from the punch motor.	R1, R2
7504 251	Finisher Proof Exit	The mainframe detects the lock signal from the registration motor of the punch unit.	R1, R2
7504 252	FIN:Stapler Position Error	The stapler unit stays on the jogger end fence so that stapling is disabled.	R1, R2
7504 253	FIN:Job Data Error	Unexpected job data is sent to the internal finisher from the mainframe.	R1, R2

Note:

• The jam location display depends on where a paper jam is detected at power-on.

ARDF (Original Jam)

Jam Code SP	Display	Description	LCD Display
7505 1	At Power On	Original is stack at power-on.	P
7505 3	Skew Correction: ON	Skew correction sensor does not detect paper.	P
7505 4	Registration: ON	Registration sensor does not detect paper.	P
7505 5	Paper Exit: ON	Exit Sensor does not detect paper.	P
7505 53	Skew Correction: OFF	Skew correction sensor does not turn off.	P
7505 54	Registration: OFF	Registration sensor does not turn off.	P
7505 55	Paper Exit: OFF	Exit Sensor does not turn off.	P