Ricoh MP6001

Before shipping, the SP mode data settings are printed in an SMC Report and attached to the exposure glass of the machine for your reference. Store this report in a safe place (next to the toner collection bottle, for example). It is a list of all the SP initial settings. Refer to this list if you need to initialize one or more SPs. The initial SP settings are also written in the SP mode tables at the end of this section.

As a rule, you should always print an SMC Report before initializing or adjusting the SP settings. The SMC Report provides a concise list of all the SP commands and their current settings. The report can be used for reference if the service manual is not available.

Executing Memory All Clear resets all the settings stored in the NVRAM to their default settings except the following:

SP5811-001	Machine serial number
SP5907	Plug & Play Brand Name and Production Name Setting

1. Execute SP5990 to print out all SMC Data Lists.

2. Open SP mode 5801.

3. Press the number for the item that you want to initialize. The number you select determines which application is initialized. For example, press 1 if you want to initialize all modules.

5801	Memory Clear
	Resets NVRAM data to the default settings. Before executing any of these SP codes, print an SMC Report.
001	All Clear	Initializes items 2 to 15 below.
002	Engine Clear	Initializes all registration settings for the engine and copy process settings.
003	SCS	Initializes default system settings, SCS (System Control Service) settings, operation display coordinates, and ROM update information.
004	IMH Memory Clear	Initializes the image file system. (IMH: Image Memory Handler)
005	MCS	Initializes the automatic delete time setting for stored documents. (MCS:  Memory  Control  Service)
006	Copier application	Initializes all copier application settings.
007	Fax application	Initializes the fax reset time, job login ID, all TX/RX settings, local storage file numbers, and off-hook timer.
008	Printer  application	Initializes the printer defaults, programs registered, the printer SP bit switches, and the printer CSS counter.
009	Scanner application	Initializes the defaults for the scanner and all the scanner SP modes.
010	Web Service/ Network application	Deletes the Netfile (NFA) management files and thumbnails, and initializes the Job login ID. Netfiles: Jobs to be printed from the document server using a PC and the DeskTopBinder software
011	NCS	Initializes the system defaults and interface settings (IP addresses also), the SmartNetMonitor for Admin settings, WebStatusMonitor settings, and the TELNET settings. (NCS: Network Control Service)
012	R-FAX	Initializes the job login ID, SmartNetMonitor for Admin, job history, and local storage file numbers.
014	Clear DCS Setting	Initializes the DCS (Delivery Control Service) settings.
015	Clear UCS Setting	Initializes the UCS (User Information Control Service) settings.
016	MIRS Setting	Initializes the MIRS (Machine Information Report Service) settings.
017	CCS	Initializes the CCS (Certification and Charge-control Service) settings.
018	SRM Clear	Initializes the SRM (System Resource Manager) settings.
019	LCS Clear	Initializes the LCS (Log Count Service) settings.

4. Press Execute, then follow the prompts on the display to complete the procedure.

5. Make sure that you perform the following settings:
• Execute SP2115 – Laser Beam Pitch Adjustment
• Do the printer and scanner registration and magnification adjustments (See "Replacement and Adjustment – Copy Image Adjustments: Printing/Scanning").
• Do the touch screen calibration (See "Replacement and Adjustment – Touch Screen Calibration").
• Referring to the SMC data lists, re-enter any values, which had been changed from their factory settings.
• Execute SP3001-002 – ID Sensor Initial Setting
• Make sure that SP 5112 is set to 'enabled', or the user will not be able to use non-standard paper sizes.
• Set SP 1902 001 (amount of fusing unit web used so far) to the most recent setting (see the SMC list).

6. Check the copy quality and the paper path, and do any necessary adjustments.