Ricoh MP2014
Adjustment after Replacement. ADF Image Adjustment
Registration
A: Leading Edge Registration
B: Side-to-side Registration
• Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of the feed stations.
2. Check the registration, and adjust using the following SP modes if necessary.
| SP No. | SP Name | Adjustment Range |
|---|---|---|
| SP6-006-001 | SideEdge: Front | ±3.0 mm |
| SP6-006-002 | SideEdge: Rear | ±3.0 mm |
| SP6-006-003 | LeadingEdge: Front | ±5.0 mm |
| SP6-006-004 | LeadingEdge: Rear | ±5.0 mm |
Sub Scan Magnification
• Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of the feed stations.
2. Check the magnification, and adjust using the following SP modes if necessary.
| SP No. | SP Name | Adjustment Range |
|---|---|---|
| SP6-017-001 | ADF Adjust Mag | ±5.0 % |