Ricoh M159 SP4520DN Gim-P1dM

Note:

• Adjust the blank margin width only if it cannot be adjusted by registration (leading edge/side-to-side). First adjust C and D; then A and B.

• [1]: Print area
• [2]: Paper feed direction

1. Enter the SP mode, and then print the test pattern (17: Trim Area ) with SP2-109-001.
2. Adjust the blank margin width of the image with SP2-103-(001-004)
   ▪ Leading edge: 2.7 to 9.9 mm (Default: 3.0 mm)
   ▪ Trailing edge: 0.0 to 9.9 mm (Default: 2.0 mm)
   ▪ Left: 0.0 to 9.9 mm (Default: 2.0 mm)
   ▪ Right: 0.0 to 9.9 mm (Default: 2.0 mm)

Registration Adjustment

Print Area

Check that the adjustment meets the product specification

• [1]: Paper feed direction
• [2]: Print area

Adjustment Reference Values

• B: Leading edge (Sub scanning direction): 3.0 ± 1.5 mm
• D: Trailing edge (Sub scanning direction): 3.0 mm
• C: Left (Main scanning direction): 2.0 ± 1.5 mm
• A: Right (Main scanning direction): 2.0 mm

Adjustment Procedure

1. Enter the SP mode, and then print the test pattern (17: Trim Area) with SP2-109-001.
   Print the test pattern, and then adjust the leading edge registration in the SP mode to the optimum value.
2. Do SP1-002-(001,002,003,004,006) to check and adjust the registration.
3. Check the side-to-side registration for each paper feed tray