Ricoh M159 SP4520DN Gim-P1dM

Follow the test pattern print procedure below to print a test pattern.

Note:
• Do not operate the machine until the test pattern has been printed. Otherwise, an SC occurs.

1. Enter the SP mode, and then select SP2-109-001.
2. Select the pattern number, and then press [OK].
3. Do the following SP to print the test pattern.

   SP
   SP2-109-002	Test Printing 1 Sheet
   SP2-109-003	Test Printing Cont. Printing (On: Continue /Off: Stop)
   SP2-109-004	Test Printing Print Side Select

4. Check the test pattern.

No.	Pattern
0	None
1	Vertical Line (1 dot)
2	Horizontal Line (1 dot)
3	Vertical Line (2 dot)
4	Horizontal Line (2 dot)
5	Grid Vertical Line
6	Grid Horizontal Line
7	Grid 20mm Pitch
8	Slanting Grid
9	Slanting Grid 20mm Pitch
10	Independent Pattern (1 dot)
11	Independent Pattern (2 dot)
12	Independent Pattern (4 dot)
13	Full Dot Pattern
14	Band
15	Gray 10mm Pitch
16	Gray 20mm Pitch
17	Trimming Area