Ricoh M0A2 SP221S

Checking the Machine Firmware Version

Print a Configuration Page before and after updating the firmware.

OP-P1/MF1 Firmware Update Procedure

1. Download the firmware file.
2. Start Smart Organizing Monitor.
3. Click the [User Tools] tab, and then click [Printer Configuration].
4. Click [Printer Firmware Update].
5. Click [OK].
6. Specify the location of the “.dwn” file, and then click [Open].
7. A message will alert you if the wrong file is selected.

Display on the machine

Display	During the update	After update completed
2-line LCD Display	“UPDATING FIRMWARE” and a progress indicator.	UPDATE IS COMPLETE TURN POWER OFF -> ON
2-digit 7-Seg LED display	“UF”	“OF”
2 LED Display	Power LED “blinks”.	Power LED “lights”.

Note:
• Instruction messages will be displayed in SOM.
• Controller FW updating takes about 20 sec.
• Engine FW updating takes about 4 to 5 min.

OP-P2/MF2 Firmware Update Procedure

1. Download the firmware file.
2. Click the "FWUpdateTool.exe" file to execute the updating program.
3. Check the information, and then click [OK].
4. For a USB connection, click "F/W Update (USB)". For a network connection, enter the machine's IP address in "Machine IP", and then click "F/W Update (NET)".
5. The machine will reboot automatically after updating is complete.

Note:
• “Wrong Model.” will be displayed if the firmware is not the correct one for the machine.
• The updating takes maximum 5 min. depending on the F/W version and the network condition.