Ricoh IMC2500

OVERVIEW

• Removable media (SD card or USB flash drive) are a precision device, so when you handle them, respect the following.
• When the power is switched ON, do not insert or remove the removable media.
• During installation, do not switch the power OFF
• Since the removable media is manufactured to high precision, do not store it in a hot or humid location, or in direct sunlight.
• Do not bend the removable media, scratch it, or give it a strong shock.
• Before downloading firmware to an SD card, check whether write-protection of the SD card is canceled. If write-protection is enabled, an error code (error code 44, etc.) will be displayed during download, and the download will fail.
• Before updating the firmware, remove the network cable from this machine.
• During software update, disconnect network cables and interface cables, remove wireless boards, etc., (so that they are not accessed during the update).

MEDIA SLOT TO USE WHEN UPDATING

Using the SD card

Use SD Card Slot 2 [E: Lower Slot] on the back of the machine or the SD card slot [F] on the left side of the operation panel.

• When inserting into the slot, push the SD card until it clicks
• Check whether the card is properly in the SD card slot. When an SD card is inserted, a click is heard, and it is locked.
• To remove the card, release by pressing once.

To use the SD card slot [E], remove the SD card slot cover.

Using the USB Flash Drive

Use the USB slot [A] on the left side of the operation panel.

UPDATE PROCEDURE

Download the latest version firmware to the removable media in advance. Create a folder called “package” on the removable media, and then download the package firmware (xxxxxxxx.pkg) to it.

• Do not put multiple machine firmware programs on the same SD card. Copy the only model firmware you want.
• If you download the firmware package to the “romdata” folder, which is the one normally used, the firmware package cannot be updated.
• When updating the firmware package of the same model, be sure to download each version separately. If you download multiple versions for the same model, only one of these versions is displayed on the machine’s operation panel, but which version is displayed is unpredictable.