Ricoh D183 MP3053 OR-C2
Maintenance Tables. Mainframe
• The amounts mentioned as the PM interval indicate the number of prints.
• After carrying out PM, clear the maintenance counter (SP7-804).
Preventive Maintenance Items
Chart: A4 (LT)/5%
Mode: 3 copies / original (prints/job)
Ratio 30%
Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.
Symbol keys: C: Clean, R: Replace, L: Lubricant, I: Inspect
Mainframe
| Item | EM | 60K | 120K | 600K | NOTE |
|---|---|---|---|---|---|
| Scanner/Laser Optics | |||||
| Reflector | C | Optics cloth | |||
| 1st Mirror | C | C | Optics cloth | ||
| 2nd Mirror | C | C | Optics cloth | ||
| 3rd Mirror | C | C | Optics cloth | ||
| Scanner Guide Rails | C | Do not use alcohol. | |||
| Platen Sheet Cover | C | C | Replace the platen sheet, if necessary. Dry cloth or alcohol | ||
| Exposure Glass | C | C | Dry cloth or alcohol | ||
| Toner Shield Glass | C | C | Optics cloth | ||
| APS Sensor | C | Dry cloth or blower brush | |||
| Around the Drum | |||||
| Transfer/Separation Unit | R | ||||
| ID Sensor | I | C | Perform the ID sensor initial setting (SP2-935) after cleaning (blower brush) | ||
| PCU | |||||
| Drum | R | Do SP2801. This initializes the developer and resets the TD and ID sensor outputs to their defaults. It also resets the PCU counter. | |||
| Charge Roller | R | ||||
| Cleaning Roller | R | ||||
| Cleaning Blade | R | ||||
| Pick-off Pawls | R | ||||
| Developer | R | ||||
| Paper Feed | |||||
| Registration Rollers | C | Clean with water | |||
| Registration Sensor | C | Dry cloth | |||
| Paper Feed Roller | C | Dry cloth | |||
| Separation Roller | C | Dry cloth | |||
| Pick-up Roller | C | Dry cloth | |||
| Relay Rollers | C | Dry cloth | |||
| Feed Sensor | C | Dry cloth | |||
| Vertical Transport Sensor | C | Dry cloth | |||
| Dust collection box | C | C | Remove, empty, clean | ||
| Fusing Unit and Paper Exit | |||||
| Fusing Entrance and Exit Guide Plates | C | Clean with water or alcohol. | |||
| Hot Roller | R | Clean with water or alcohol. | |||
| Pressure Roller | R | Clean with water or alcohol. | |||
| Fusing Thermistors | R | Clean with water or alcohol. | |||
| Cleaning Roller | C | Clean with water or alcohol. | |||
| Cleaning Roller Bushings | C | Clean with water or alcohol. | |||
| Hot Roller Strippers | C | R | Cleaner | ||
| Hot Roller and Pressure Roller Bushings | L | Grease Barrierta S552R (A2579300) | |||
| Exit Roller | C | Clean with water | |||
| Reverse Roller | C | Clean with water | |||
| Reverse Sensor | C | Clean with water | |||
| Duplex | |||||
| Rollers | C | Clean with water. | |||
| Duplex Entrance Sensor | C | Clean with water. | |||
| Duplex Exit Sensor | C | Clean with water. | |||