Ricoh D159 MP2001L K-C4

• Before doing the following scanner adjustments, perform or check the printing registration / side-to-side adjustment and the blank margin adjustment.
• Use an S5S test chart to perform the following adjustments.

Registration: Platen Mode

A: Leading edge registration (L-Edge Regist Adj)
B: Side-to-side registration (S-to-S Regist Adj)

1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the leading edge and side-to-side registration, and adjust them using the following SP modes if necessary.

SP No.	SP Name	Adjustment Range
SP4-010-001	L-Edge Regist Adj	±2.0 mm
SP4-011-001	S-to-S Regist Adj	±2.0 mm

• Use an S5S test chart to do the following adjustment.

A: Sub-scan Magnification

1. Place the test chart on the exposure glass and make a copy from one of the feed stations.
2. Check the magnification ratio and adjust using the following SP mode if necessary.

SP No.	SP Name	Adjustment Range
SP4-008-001	Sub-scan Mag. Adj	±1.0 %