-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Ricoh D130-17 MP5002
Service Program Mode Tables. SP10XX: FEED
1001* |
Leading Edge Registration: |
Adjusts the leading edge registration by changing the registration clutch operation timing. |
001 |
Tray: Plain |
[–9 to 9/ 0 / 0.1 mm step] |
002 |
Tray: Thick 1 |
003 |
Tray: Thick 2 |
004 |
By-pass: Plain |
005 |
By-pass: Thick 1 |
006 |
By-pass: Thick 2 |
007 |
Duplex: Plain |
008 |
Duplex: Thick 1 |
1002* |
Side-to-Side Registration |
Adjusts the side to side registration by changing the laser main scan start position for each mode |
001 |
By-pass |
[–4 to 4/ 0 / 0.1 mm step] |
002 |
Tray 1 |
003 |
Tray 2 |
004 |
Tray 3 |
005 |
Tray 4 |
006 |
LCT |
007 |
Duplex |
1003* |
Registration Buckle Adjustment |
Adjusts the paper feed motor timing. Paper feed motor timing determines the amount of paper buckle at Registration. (A "+" setting causes more buckling.) |
001 |
Tray 1: Plain |
[-9 to 5 / -4 / 1 mm step] |
002 |
Tray 1: Thick 1 |
003 |
Tray 1: Thick 2 |
004 |
Tray 2, 3, 4: Plain |
005 |
Tray 2, 3, 4: Thick1 |
006 |
Tray 2, 3, 4: Thick2 |
007 |
By-pass: Plain |
[-9 to 5 / -2 /1 mm step] |
008 |
By-pass: Thick 1 |
009 |
By-pass: Thick 2 |
010 |
Duplex: Plain |
[-9 to 5 / -4 / 1 mm step] |
011 |
Duplex: Thick 1 |
[-9 to 5 / -3 / 1 mm step] |
012 |
LCT: Plain |
013 |
LCT: Thick1 |
014 |
LCT: Thick2 |
1007* |
By-pass Paper Size Detection |
Controls paper size detection for the by-pass feed table. |
001 |
Detection Timing |
[-15 to 15 / 0 / 5 mm step] |
002 |
LG Detection |
[0 to 1 / 0 / 1] 0: LT SEF, 1: LG |