Ricoh D122 MP3352
Troubleshooting. Jam Codes 6
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7-504-193 | FIN Trans: OFF (D586) | Paper stays at the vertical transport sensor. | R1-R2 |
| 7-504-194 | FIN Entrance (D586) | Exit sensor does not detect paper. | R1-R2 |
| 7-504-195 | FIN Front Jogger Motor (D586) | Front fence HP sensor does not turn off after the front fence has moved from its home position. Front fence HP sensor does not turn on after the front fence has returned to its home position. |
R1-R2 |
| 7-504-196 | FIN Rear Jogger Motor (D586) | Rear fence HP sensor does not turn off after the rear fence has moved from its home position. Rear fence HP sensor does not turn on after the rear fence has returned to its home position. |
R1-R2 |
| 7-504-197 | FIN Shift Roller Motor (D586 | Shift motor HP sensor does not turn off after the shift roller has moved from its home position. Shift motor HP sensor does not turn on after the shift roller has returned to its home position. |
R1-R2 |
| 7-504-198 | FIN Positioning Roller (D586) | Positioning roller HP sensor does not turn off after the positioning roller has moved from its home position. Positioning roller HP sensor does not turn on after the positioning roller has returned to its home position. |
R1-R2 |
| 7-504-199 | FIN Paper Exit Plate Motor (D586) | Exit guide plate HP sensor does not turn off after the guide plate has moved from its position. Exit guide plate HP sensor does not turn on after the guide plate has returned to its position. |
R1-R2 |
| 7-504-200 | FIN Staple Shift Motor (D586) | Stapler HP sensor does not turn off after the finisher stapler movement motor has turned on. Stapler HP sensor does not turn on after the finisher stapler movement motor has turned off. |
R1-R2 |
| 7-504-201 | FIN Tray Lift Motor (D586) | Paper height sensor does not turn on after the output tray has lifted up. Paper height sensor does not turn off after the output tray has moved down. |
R1-R2 |
| 7-504-202 | FIN Staple Motor (D586) | Corner stapler does not finish stapling after a specified time. | R1-R2 |
| 7-504-203 | FIN Stack Height SOL (D586) | Paper height sensor does not turn on after the edge depressor has retracted from the stack. Paper height sensor does not turn off after the edge depressor has touched the top of the stack. |
R1-R2 |
| 7-504-204 | FIN Punch Motor (D586) | Punch encoder sensor does not turn on/off after the punch drive motor has turned on. Paper position slide HP sensor does not turn on/off after the paper position sensor slide motor has turned on. |
R1-R2 |
| 7-504-205 | FIN Punch Movement Motor (D586) | Punch movement HP sensor does not turn on/off after the punch movement motor has turned on. | R1-R2 |
| 7-504-206 | FIN Registration Motor (D586) | Paper position slide HP sensor does not turn on after the paper position sensor slide motor has turned off. Paper position slide HP sensor does not turn off after the paper position sensor slide motor has turned on. |
R1-R2 |
| 7-504-230 | Fin Exit | Paper exit sensor does not detect paper. | R1-R2 |
| 7-504-231 | Insufficient Data | Data is Insufficient. | R1-R2 |