Ricoh D122 MP3352
Troubleshooting. Jam Codes 5
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7-504-166 | Exit Motor (D585) | Feed out belt HP sensor does not turn on after the feed out belt motor has turned off. Feed out belt HP sensor does not turn off after the feed out belt motor has turned on. |
R1 |
| 7-504-167 | FIN Staple Shift Motor (D585) | Stapler HP sensor does not turn off after the finisher stapler movement motor has turned on. Stapler HP sensor does not turn on after the finisher stapler movement motor has turned off. |
R1 |
| 7-504-168 | FIN Staple Motor (D585) | Corner stapler does not finish stapling after a specified time. | R1 |
| 7-504-169 | FIN Tray Lift Motor (D585) | Paper height sensor does not turn on after the output tray has lifted up. Paper height sensor does not turn off after the output tray has moved down. | R1 |
| 7-504-170 | FIN Stack Height SOL (D585 | Paper height sensor does not turn on after the edge depressor has retracted from the stack. Paper height sensor does not turn off after the edge depressor has touched the top of the stack. |
R1 |
| 7-504-190 | FIN Entrance: ON (D586) | Paper does not reach the entrance sensor. | R1-R2 |
| 7-504-191 | FIN Entrance: OFF (D586) | Paper stays at the entrance sensor. | R1-R2 |
| 7-504-192 | FIN Trans ON (D586) | Paper does not reach the vertical transport sensor. | R1-R2 |