Ricoh D120 MP2352SP
Troubleshooting. Jam Codes 2
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7-504-061 | Bridge Tray Exit: Off | Tray exit sensor (bridge unit) does not turn off. | D |
| 7-504-062 | Bridge Relay: Off | Relay sensor (bridge unit) does not turn off. | D |
| 7-504-064 | Inverter: Off | Junction gate jam sensor does not turn off. | C |
| 7-504-065 | Duplex Exit: Off | Duplex exit sensor does not turn off. | Z |
| 7-504-067 | Duplex Ent: Off | Duplex entrance sensor does not turn off after paper has passed this sensor. | Z |
| 7-504-100 | Finisher Entrance (D588) | Paper does not reach the entrance sensor or stay at the entrance sensor. | R1-R2 |
| 7-504-101 | Finisher Shift Tray Exit (D588) | Paper does not reach the lower tray exit sensor or stay at the lower tray exit sensor. | R1-R2 |
| 7-504-102 | Finisher Staple (D588) | Paper does not reach the staple tray entrance sensor or stay at the staple tray entrance sensor. | R3-R5 |
| 7-504-103 | Finisher Exit (D588) | Lower tray exit sensor does not detect paper after the stack feed-out belt has fed paper. Lower tray exit sensor still detects paper after the stack feed-out belt has returned to the home position. |
R3-R5 |
| 7-504-105 | Finisher Tray Lift Motor (D588) | Stack height sensor does not detect paper after the lower tray has lifted up. Stack height sensor still detects paper after the lower tray has lifted down. | R1-R2 |
| 7-504-106 | Finisher Jogger Motor (D588) | Jogger fence HP sensor does not turn off after the jogger fence has moved from its home position. Jogger fence HP sensor does not turn on after the jogger fence has returned to its home position. |
R3-R5 |
| 7-504-107 | Finisher Shift Motor (D588) | Shift roller HP sensor does not turn off after the shift roller has moved from its home position. Shift roller HP sensor does not turn on after the shift roller has returned to its home position. |
R1-R2 |
| 7-504-108 | Finisher Staple Motor (D588) | Stapler HP sensor does not turn off after the stapler has moved from its home position. Stapler HP sensor does not turn on after the stapler has returned to its home position. | R3-R5 |
| 7-504-109 | Finisher Exit Motor (D588) | Stack belt HP sensor does not turn off after the stack feed-out belt has moved from its home position. Stack feed-out belt HP sensor does not turn on after the stack feed-out belt has returned to its home position. |
R3-R5 |
| 7-504-130 | FIN Entrance (D589) | Paper does not reach the entrance sensor or stay at the entrance sensor. | R1-R3 |
| 7-504-131 | FIN Proof Tray Exit (D589) | Paper does not reach the proof tray exit sensor or stays at the proof tray exit sensor. | R1-R3 |