Ricoh D0C6 IM350

After changing an SP value for registration or image adjustment, print a test pattern to check the adjustment result.

1. Enter the SP mode.
2. Select SP2-109-001 (Test Printing: pattern Selection).
3. Select the number for a test pattern that you want to print.
   Printer model: Press [Up] [Down] key to select the test pattern, and then press [OK] key.
   MF model: Press the test pattern key, and then press [OK] key.
4. Enter SP2-109-002 (1 Sheet Printing) or SP2-109-003 (Continue Printing), and then press “Execute” to print test pattern.
   When 1 sheet printing, you can select the print side with SP2-109-004 (Print Side Select).
5. Exit SP mode.

No.	Pattern	No.	Pattern
0	None	9	Arg.Grid20mm
1	Vert. (1dot)	10	Indep.(1dot)
2	Hori. (1dot)	11	Indep.(2dot)
3	Vert. (2dot)	12	IIndep.(4dot)
4	Hori. (2dot)	13	Full
5	Grid Vert.	14	Band
6	Grid Hori.	15	Trim Area
7	Grid 20mm	16	White (MF model only)
8	Arg. Grid	17	SFBC Pattern (MF model only)