Ricoh D0BW IM600SRF
Service Program Mode. Input and Output Check
Input Check Table (SP5-803)
When entering the Input Check mode, 8 digits display the result for a section. Each digit corresponds to a different device as shown in the table.
| Bit No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Result | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 |
| SP | Description | Reading | |
|---|---|---|---|
| 0 | 1 | ||
| 5-803-001 | Exit Full Sensor | Paper detected | Paper not detected |
| 5-803-016 | Key Card Set | Set | Not set |
| 5-803-017 | Key Counter Set | Set | Not set |
| 5-803-018 | IPU Version | - | - |
Note: SP5-803-200 and SP5-803-201 do not work.
Output Check Table (SP5-804)
Activates the electrical components for functional check.
It is not possible to activate more than one component at the same time.
| SP | Display |
|---|---|
| 5-804-001 | CTLFAN Motor |
| 5-804-101 | FAN:LSU/DLP/CENTER/REAR |
| 5-804-102 | FAN:LVU |
| 5-804-103 | Toner Motor |
| 5-804-202 | Scanner Lamp |
| 5-804-203 | ADF Motor |