Ricoh D0B2 G1027

Test Pattern Printing

Some of these test patterns are used for copy image adjustments but most are used primarily for design testing.

Note:
• Do not operate the machine until the test pattern is printed out completely. Otherwise, SC will occur.

1. Press the [User Tools] key.
2. Select “Print List/Report” from the list then press the [OK] key.
3. Select “Test Page” or “Registration Page” to print from the list then press the [OK] key.
4. Press [Yes] to print the selected pattern.

SMC Page Printing

1. Enter the “Maintenance Mode”.
2. Select “Print reports” from the list then press [OK] key.
3. Select “SMC Page Print” for print from the list then press [OK] key.
4. Press [Yes] to print the SMC reports.