Ricoh D0AF MPC5504exASP Met-C2.1d
Adjustment. Scanning
Check the printing registration/side-to-side adjustment and the blank margin adjustment before you do the following scanner adjustments.
• Use a C4 test chart to do the following adjustments.
Scanner sub-scan magnification
A: Sub-scan magnification
1. Put the test chart on the exposure glass. Then make a copy from one of the feed stations.
2. Check the magnification ratio. Adjust with SP4-008 if necessary. Standard: ±1.0%.
Scanner leading edge and side-to-side registration
A: Leading Edge Registration
- Put the test chart on the exposure glass. Then make a copy from one of the feed stations.
- Check the leading edge and side-to-side registration. Adjust the following SP modes if necessary. Standard: 0 ± 2mm for the leading edge registration, 0 ± 2.5mm for the side-to-side registration.
| Leading edge registration (Home Position Adj Value) | SP4-803-001 |
| Side-to-Side Registration (Main Scan Reg) | SP4-011-001 |