Ricoh D0AB SPC361SFNw
Troubleshooting. When SC365 Is Displayed
Cause
The toner sensor [B] fails to light because the sensor harness [A] is broken.
Solution
- Enter the SP mode, then execute SP3-017-001 (TnrRmnSnsFc).
- Check the output count of each color toner in the following SPs.
SP3-411-005: SnsOutCntAvK
SP3-411-006: SnsOutCntAvY
SP3-411-007: SnsOutCntAvM
SP3-411-008: SnsOutCntAvC
• If the sensor output count is "0 times", the harness is likely to be broken. - Replace the sensor harness of the corresponding color.