Ricoh D0A0 SPC360SFNw
Service Program Mode. Entering
Entering SP Mode
In the MF Model, if there are no Classic Application (copy/printer/scanner/fax) icons on the Home screen, follow the procedure below to display the number keyboard.
1. Press and hold the button [B] located at the right side of the operation panel and "Check Status [A]" at the same time, until the number keyboard is displayed.
2. Enter the key code for SP mode.
Exiting SP Mode
Press "Exit" on the LCD twice to return to the user screen.
In the printer model, press the [Escape] key.
Note:
• To make the settings effective, turn the main power switch off and on after exiting service mode.