Ricoh D041 MPC2550 DI-C1
Troubleshooting. Jam Codes 1
Paper Size Code
| Size Code | Paper Size | Size Code | Paper Size |
|---|---|---|---|
| 05 | A4 LEF | 141 | B4 SEF |
| 06 | A5 LEF | 142 | B5 SEF |
| 14 | B5 LEF | 160 | DLT SEF |
| 38 | LT LEF | 164 | LG SEF |
| 44 | HLT LEF | 166 | LT SEF |
| 132 | A3 SEF | 172 | HLT SEF |
| 133 | A4 SEF | 255 | Others |
| 134 | A5 SEF | - | - |
SP7-504 shows how many jams occurred at each location.
Mainframe
| Jam Code SP | Display | Description | LCD Display |
|---|---|---|---|
| 7504 1 | At Power On | Paper is stack at power-on. | * Note |
| 7504 3 | Tray 1: ON | Paper is not fed from tray 1. | A2 |
| 7504 4 | Tray 2: ON | Paper is not fed from tray 2. | A1 |
| 7504 5 | Tray 3: ON | Paper is not fed from tray 3 (one-tray paper feed unit). | Y |
| 7504 6 | Tray 4: ON | Paper is not fed from tray 4. | Y |
| 7504 8 | Bypass: ON | Paper is not fed from the by-pass tray. | A2 |
| 7504 9 | Duplex: ON | Paper is jammed at the duplex unit. | Z |
| 7504 11 | Vertical Transport 1: ON | Vertical transport sensor 1 does not detect paper from tray 1. | A1 |
| 7504 12 | Vertical Transport 2: ON | Vertical transport sensor 2 does not detect paper from tray 2. | Y |
| 7504 17 | Registration: ON | Registration sensor does not detect paper. | A2 |
| 7504 18 | Fusing Entrance: ON | Fusing entrance sensor does not detect paper. | B |
| 7504 19 | Fusing Exit: ON | Fusing exit sensor does not detect paper. | C |
| 7504 20 | Paper Exit: ON | Paper exit sensor does not detect paper. | C |
| 7504 21 | Relay Exit: ON | Tray exit sensor (bridge unit) does not detect paper. | D |
| 7504 24 | Inverter Sn: ON | Inverter sensor does not detect paper. | C |
| 7504 25 | Duplex Exit: ON | Duplex exit sensor does not detect paper. | Z |
| 7504 27 | Duplex Entrance: ON | Duplex entrance sensor does not detect paper. | Z |
| 7504 28 | 1-Bin Exit Sensor | 1-bin tray exit sensor does not detect paper. | C |
| 7504 29 | R-tray Paper Exit: ON | Paper exit sensor of the side tray does not detect paper. | C |
| 7504 51 | Vertical Transport Sensor1 |
Vertical transport sensor 1 does not turn off. | A1, A2 |
| 7504 52 | Vertical Transport Sensor2 |
Vertical transport sensor 2 does not turn off. | Y |
| 7504 53 | Vertical Transport Sensor3 |
Vertical transport sensor 3 does not turn off. | Y |
| 7504 57 | Registration Sensor | Registration sensor does not turn off. | B |
| 7504 58 | Fusing Entrance Sensor | Fusing entrance sensor does not turn off. | C |
| 7504 59 | Fusing Exit Sensor | Fusing exit sensor does not turn off. | C |
| 7504 60 | Exit Sensor | Paper exit sensor does not turn off. | C |
| 7504 64 | Inverter Sensor | Inverter sensor does not turn off. | C |
| 7504 65 | Duplex Exit Sensor | Duplex exit sensor does not turn off. | Z |
| 7504 67 | Duplex Entrance Sensor | Duplex entrance sensor does not turn off. | Z |
| 7504 68 | 1-Bin Exit: ON | 1-bin tray exit sensor does not turn off. | R |
| 7504 69 | R-tray Paper Exit Sensor | Paper exit sensor of the side tray does not turn off. | W |
| 7504 230 | FIN:Paper Exit Error | The machine does not get paper exit data from the internal finisher. | R1, R2 |
| 7504 231 | FIN:Command Error | The machine gets a command error from the internal finisher. | R1, R2 |
| 7504 240 | Fin. Entrance: ON | Entrance sensor of the internal finisher does not detect paper. | C, R1, R2 |
| 7504 241 | Fin. Entrance Sensor | Entrance sensor of the internal finisher does not turn off. |
R1, R2 |
| 7504 242 | Feed-Out Belt Motor | The mainframe detects the lock signal from the paper transport motor of the internal finisher. | R1, R2 |
Note:
• The jam location display depends on where a paper jam is detected at power-on.