Ricoh D014 MPC6000SP V-C2
Maintenance. PM Tables 5
3000-Sheet Finisher B830
| 350K | 700K | 1050K | Note | |
|---|---|---|---|---|
| FINISHER | ||||
| Driver rollers | I | I | I | Alcohol |
| Idle rollers | I | I | I | Alcohol |
| Discharge brush | I | I | I | Alcohol |
| Shaft Bearings | I | I | I | Lubricate with silicone oil if noisy. |
| Sensors | I | I | I | Blower brush. |
| Jogger fences | I | I | I | Make sure that the screws are tight. |
| Staple waste hopper | C | C | C | Empty staple waste. |
Punch B831
| 300K | 450K | 600K | EM | Note | |
|---|---|---|---|---|---|
| Punch Waste Hopper | I | I | I | Remove and empty |
Cover Interposer Tray B835
The PM interval is for the number of sheets that have been fed.
| 60 K | As Needed | Note | |
|---|---|---|---|
| Drive rollers | C | Dry cloth | |
| Idle rollers | C | Dry cloth | |
| Feed belt | R | ||
| Separation roller | R | ||
| Pick-up roller | R | ||
| Sensors | C | Blower brush. | |
| Drive gears | I | Lubricate with a very small amount of G501. |