| Jam Code SP |
Display |
Description |
LCD Display |
| 7504 196 |
Finisher Staple: EUP (B804/B805) |
Not used |
- |
| 7504 197 |
Finisher Saddle Stitch Staple: EUP(B804/B805) |
Not used |
- |
| 7504 198 |
Finisher Folder: EUP (B804 only) |
- Fold bottom fence HP sensor does not turn on after the fold roller motor has stopped.
- Fold unit exit sensor does not turn on after the fold rollers have stopped.
- Fold unit exit sensor does not turn off after the fold rollers have stopped.
|
R8-R12 |
| 7504 199 |
Finisher Tray Motor: EUP (B804/B805) |
- Upper tray limit sensor does not turn on after the upper tray has lifted up.
- Upper tray limit sensor does not turn off after the upper tray has moved down.
|
[B804]:
R1-R4/
R5-R7
[B805]:
R1-R4/
R5-R8 |
| 7504 200 |
Finisher Jogger Motor:
EUP(B804/B805) |
- Jogger fence HP sensor does not turn on/ off after the jogger motor has turned on.
- Stack feed out belt HP sensor does not turn on/off after the feed out belt motor has turned on.
|
[B804]:
R5-R7/
R8-R12
[B805]:
R5-R8 |
| 7504 201 |
Finisher Shift Motor: EUP (B804/B805) |
- Shift roller HP sensor does not turn on/off after the shift roller motor has turned on.
- Exit guide plate HP sensor does not turn on/off after the exit guide plate motor has turned on.
- Stacking roller HP sensor does not turn on/off after the stacking sponge roller motor has turned on.
|
[B804]:
R1-R4/
R5-R7
[B805]:
R1-R4/
R5-R8 |
| 7504 202 |
Finisher Staple Moving Motor: EUP (B804/
B805) |
- Corner stapler HP sensor does not turn on/off after the corner stapler movement motor has turned on.
- Stapler rotation HP sensor does not turn on/off after the corner stapler rotation motor has turned on.
|
[B804]:
R5-R7/
R8-R12
[B805]:
R5-R8 |
| 7504 203 |
Finisher Staple Motor:
EUP(B804/B805) |
- Corner stapler does not finish stapling after a specified time.
- Booklet stapler does not finish stapling after a specified time.
|
[B804]:
R5-R7/
R8-R12
[B805]:
R5-R8 |
| 7504 204 |
Finisher Folder Motor:
EUP (B804 only) |
- Fold plate HP sensor does not turn on/off after the fold plate motor has turned on.
- Clamp roller HP sensor does not turn on/ off after the clamp roller retraction motor has turned on.
- Fold bottom fence HP sensor does not turn on/off after the fold unit bottom fence lift motor has turned on.
- Stack junction gate HP sensor does not turn on/off after the stack junction gate motor has turned on.
|
R8-R12 |
| 7504 205 |
Finisher Exit Motor: EUP (B804/B805) |
Not used |
- |
| 7504 206 |
Finisher Punch Motor: EUP (B804/B805) |
- Punch encoder sensor does not turn on/ off after the punch drive motor has turned on.
- Punch movement HP sensor does not turn on/off after the punch movement motor has turned on.
- Paper position slide HP sensor does not turn on/off after the paper position sensor slide motor has turned on.
|
R1-R4 |
| 7504 230 |
Finisher Exit No Response |
The machine does not get a paper exit signal from the finisher. |
- |
| 7504 231 |
Finisher Communication
Error |
The machine does not detect the finisher. |
- |