Ricoh B222 MPC3500 AP-C1
Troubleshooting. Jam Codes 2
Jam Code SP | Display | Description | LCD Display |
---|---|---|---|
7504 65 | Duplex Exit Sensor | Duplex exit sensor does not turn off. | Z |
7504 66 | Duplex Entrance: OFF (In) | Duplex entrance sensor does not turn off. | Z |
7504 67 | Duplex Entrance: OFF (Out) | Duplex entrance sensor does not turn off after paper has passed this sensor. | Z |
7504 68 | 1-Bin Exit: ON | 1-bin tray exit sensor does not turn off. | C |
7504 100 | Finisher Entrance (B408) | Paper does not reach to the entrance sensor or stay at the entrance sensor. | R1-R2 |
7504 101 | Finisher Shift Tray Exit (B408) | Paper does not reach to the lower tray exit sensor or stay at the lower tray exit sensor. | R1-R2 |
7504 102 | Finisher Staple (B408) | Paper does not reach to the staple tray entrance sensor or stay at the staple tray entrance sensor. | R3-R5 |
7504 103 | Finisher Exit (B408) |
|
R3-R5 |
7504 104 | Finisher Drive Motor (B408) | Exit guide plate HP sensor does not turn on or off for specified time. | |
7504 105 | Finisher Tray Lift Motor (B408) |
|
R1-R2 |
7504 106 | Finisher Jogger Motor (B408) |
|
R3-R5 |
7504 107 | Finisher Shift Motor (B408) |
|
R1-R2 |
7504 108 | Finisher Staple Motor (B408) |
|
R3-R5 |
7504 109 | Finisher Exit Motor (B408) |
|
R3-R5 |
7504 191 | Finisher Entrance: EUP (B804/B805) | Paper does not reach the finisher entrance sensor or stays at the finisher entrance sensor. | R1-R4 |
7504 192 | Finisher Proof Exit: EUP (B804/B805) | Paper does not reach the proof tray exit sensor or stays at the proof tray exit sensor. | R1-R4 |
7504 193 | Finisher Shift Tray Exit: EUP (B804/B805) | Paper does not reach the upper tray exit sensor or stays at the upper tray exit sensor. | R1-R4 |
7504 194 | Finisher Stapler Exit: EUP (B804/B805) |
|
[B804]: R5-R7 [B805]: R5-R8 |
7504 195 | Finisher Exit: EUP (B804/ B805) | • Upper tray exit sensor does not turn on while the stack feed-out belt is turned on. • Upper tray exit sensor does not turn off after the stack feed-out belt has returned to its home position. |
[B804]: R1-R4/ R8-R1 [B805]: R8-R12 |