OKI MPS3537mc plus
Self-diagnostic mode. Color registration correction test
This self-diagnostic menu item is used for the color registration error adjustment and to investigate cause of the error of a printer. If the color registration error is recognized by the color registration correction test, correct it by following section 2 "General of color blur correction"
- Enter the self-diagnostic mode (level 1) and keep pressing the [2] or [8] key until the following message is displayed.
REG ADJUST TEST - When the [6] key is pressed, the following message is displayed. Keep pressing the [2] or [8] key until the target item is displayed.
REG ADJUST TEST
REG ADJ EXECUTE - When the [6] key is pressed, test of the item that is displayed on the panel is executed.
<<During execution of REG ADJ EXECUTE>>
① The color registration correction test is executed. (The [DATA] lamp flashes.)
② When the test is complete, the test result (OK or error name) is displayed in the upper row of the display area, and ****RESULT is displayed in the lower row of the display area
OK
REG ADJ RESULT
When the [2] key is pressed, the test results are displayed by incrementing them.
When the [8] key is pressed, the test results are displayed by decrementing them.
Pressing the [4] key returns the screen to the state of step 2.
Remarks The following message is displayed during initialization, when the cover is opened and during alarm.
NG
REG ADJ RESULT
③ When the [#] key is pressed while test is in progress (while the [DATA] lamp is lighting), the screen returns to the state of step 2.
<<During execution of REG ADJ RESULT>>
The same as the key operations of step 2. During execution of REG ADJ EXECUTE.
<<During execution of BLT REFLECT TEST>>
① The color registration correction test is executed. (The [DATA] lamp flashes.)
② When the test is complete, the test result (OK or error name) is displayed in the upper row of the display area, and ****RESULT is displayed in the lower row of the display area
OK
BLT REFLECT RSLT
When the [2] key is pressed, the test results are displayed by incrementing them.
When the [8] key is pressed, the test results are displayed by decrementing them.
Pressing the [4] key returns the screen to the state of step 2.
③ When the [#] key is pressed while test is in progress (while the [DATA] lamp is lighting), the screen returns to the state of step 2.
<<During execution of BLT REFLECT RSLT>>
The same as the key operations of step ②. During execution of BLT REFLECT TEST.
Remarks The following message is displayed during initialization, when the cover is opened and during alarm.
NG
REG REFLECT RSLT - Repeat steps 2 and 3 as required.
- Pressing the [4] terminates the test. (Returns to the status of step 1.)
Color registration correction test items
Display | Function |
---|---|
REG ADJ EXECUTE | Executes color registration adjustment. |
REG ADJ RESULT | Displays the result of color registration adjustment. |
BLT REFLECT TEST | Judges whether color registration adjustment belt reflection is proper. |
BLT REFLECT RSLT | Displays the result of color registration adjustment belt reflection judgment. |