OKI MC363

Service Menu

When the equipment is in standby mode, access the password entry screen by pressing
[Setting] → [#] → [0] → [1] → [0] → [3] → [*].

The initial Password is set to "000000" (six zeros).

Entering self-diagnostic mode (level 1)

1. Make sure that the LCD is in standby state (no Error window is shown) and press the [Setting] to move to the setting widow and then press the following button in the indicated sequence.
   [#] → [0] → [1] → [0] → [3] → [*]
2. Type in the password to enter Service Maintenance Menu. It is [000000] by default. (Enter 0 six times)
3. Select [Printer Maintenance] → [Engine Diag Mode] in the Service Maintenance Menu and press the [6].

Exiting self-diagnostic mode

1. When the [4] is pressed from Diag Mode (Window displaying/Factory state), the setting window will return.