OKI MC160nMFP
Firmware Update
Preparations for firmware upgrading
Note
- Make sure that the scanner driver has been installed in the PC.
- Before updating the firmware, print Configuration Page to confirm the current Firmware Version.
Upgrading procedure
Boot Rom firmware rewriting
- Connect the machine and PC using the USB cable.
- Turn ON the machine's main switch pressing Select key.
- Confirm that [AMBER-AIO BOOTROM] appears on the screen.
2 0 0 8 / 0 8 / 0 6 V0 . 1 2
4IN1 BOOTROM MODE
2 0 0 8 / 0 8 / 0 6 V0 . 1 2
AMBER-AIO BOOTROM - Copy the firmware data and upgrading program in any arbitrary directory of the PC.
- Double-click “UpdateFW.exe”.
- Click [Browse] and select File path, “XXXXX.bin".
- Click [Update].
- Firmware updating starts.
- When [Transfer Successfully!] message appears on the screen, click [OK] to close the execution tool.
- Confirm that [FIRMWARE UPDATE OK] message has been displayed, and turn OFF/ ON the machine's main switch
FIRMWARE UPDATE
FIRMWARE UPDATE OK
MACHINE POWER OFF/ON - Print [CONFIGURATION PAGE] to confirm the Boot Code Firmware Version.
Controller firmware upgrading
- Connect the machine and PC using the USB cable.
- Copy the firmware data and upgrading program in any arbitrary directory of the PC.
- Double-click “UpdateFW.exe”.
- Click [Browse] and select File path, “XXXXX.bin".
- Click [Update].
- Firmware updating starts.
- When [Transfer Successfully!] message appears on the screen, click [OK] to close the execution tool.
- Confirm that [FIRMWARE UPDATE OK] message has been displayed, and turn OFF/ ON the machine's main switch.
FIRMWARE UPDATE
FIRMWARE UPDATE OK
MACHINE POWER OFF/ON - Print [CONFIGURATION PAGE] to confirm the Controller Firmware Version.