OKI MC160MFP
Troubleshooting. Misfeed at tray1 media feed section
Detection timing
Detection of misfeed at media feed section.
The leading edge of the media does not block the registration sensor (PS2) even after the lapse of a predetermined period of time after the tray1 media feed solenoid (SD1) has been energized.
Relevant electrical parts:
Registration sensor (PS2)
Tray1 media feed solenoid (SD1)
Printer control board (PRCB)
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial check items | ||
| 2 | Check the PRCB connector for proper connection and correct as necessary. | ||
| 3 | PS2 sensor check. | PRCB PJ12-6 (ON) | C-3 |
| 4 | SD1 operation check. | PRCB PJ10-2 (REM) | C-10 |
| 5 | Change PRCB. |