OKI MC160MFP
Service Mode. CLEAR DATA
SRAM CLEAR
Function
To clear the settings for the functions listed at the right and return the functions to their default settings.
Use
The following items are cleared (initialization).
- Menu mode (Except for [ADMIN. MANAGEMENT] - [USER SETTING] - [DATE&TIME] that keeps its setting value):
- Only [USER SERVICE MODE] of the user service mode: Set to default
- Only [TX/RX Result] of the Display mode: Clear
- Only [SERVICE’S CHOICE] and [SOFT SWITCH] of the Service mode: Set to default
Setting/ procedure
NOTE
- Before executing [SRAM CLEAR], be sure to record the setting values that are to be initialized through [SRAM CLEAR].
- For the record of the setting values, it is a good idea to have reports and lists printed.
- Some setting values are not included any of these reports or lists. Be sure to make a note of them separately.
- After [SRAM CLEAR] has been executed, make necessary entries of data again based on the setting values recorded.
MEMORY CLEAR
Function
To clear the settings for the functions listed at the right and return the functions to their default settings.
Use
The following items are cleared (initialization).
• Only [SERVICE’S CHOICE] and [FIXED ZOOM CHANGE] of the Service mode: Set to default
Setting/ procedure
NOTE
- Before executing [MEMORY CLEAR], be sure to record the setting values that are to be initialized through [MEMORY CLEAR].
- For the record of the setting values, it is a good idea to have reports and lists printed.
- Some setting values are not included any of these reports or lists. Be sure to make a note of them separately
- After [MEMORY CLEAR] has been executed, make necessary entries of data again based on the setting values recorde