OKI MC160MFP

Preparations for firmware upgrading

Note

• Make sure that the scanner driver has been installed in the PC.
• Before updating the firmware, print Configuration Page to confirm the current Firmware Version.

Upgrading procedure

Boot Rom firmware rewriting

1. Connect the machine and PC using the USB cable.
2. Turn ON the machine's main switch pressing Select key.
3. Confirm that [AMBER-AIO BOOTROM] appears on the screen.
   2 0 0 8 / 0 8 / 0 6 V0 . 1 2
   4IN1 BOOTROM MODE
   
   2 0 0 8 / 0 8 / 0 6 V0 . 1 2
   AMBER-AIO BOOTROM
4. Copy the firmware data and upgrading program in any arbitrary directory of the PC.
5. Double-click “UpdateFW.exe”.
6. Click [Browse] and select File path, “XXXXX.bin".
7. Click [Update].
8. Firmware updating starts.
9. When [Transfer Successfully!] message appears on the screen, click [OK] to close the execution tool.
10. Confirm that [FIRMWARE UPDATE OK] message has been displayed, and turn OFF/ ON the machine's main switch
    FIRMWARE UPDATE
    FIRMWARE UPDATE OK
    MACHINE POWER OFF/ON
11. Print [CONFIGURATION PAGE] to confirm the Boot Code Firmware Version.

Controller firmware upgrading

1. Connect the machine and PC using the USB cable.
2. Copy the firmware data and upgrading program in any arbitrary directory of the PC.
3. Double-click “UpdateFW.exe”.
4. Click [Browse] and select File path, “XXXXX.bin".
5. Click [Update].
6. Firmware updating starts.
7. When [Transfer Successfully!] message appears on the screen, click [OK] to close the execution tool.
8. Confirm that [FIRMWARE UPDATE OK] message has been displayed, and turn OFF/ ON the machine's main switch.
   FIRMWARE UPDATE
   FIRMWARE UPDATE OK
   MACHINE POWER OFF/ON
9. Print [CONFIGURATION PAGE] to confirm the Controller Firmware Version.