OKI MB290
Maintenance. OTHER FUNCTIONS 1
Some of the administrator functions allow you to display or print the terminal counters.
The table below details the counters available:
The counter ... | lists the number of ... |
---|---|
Printed pages counter | pages printed |
Scanned pages counter | pages scanned |
Printed sheets counter | paper sheets printed |
Printer does not grip the sheet | no-paper feeds detected on the printer |
Jam in printer | paper jams detected inside the printer |
Jam in printer output | paper jams detected on the exit tray |
Manual and automatic ON/OFF | times the machine has been switched On/Off (manually and automatically) |
Insert toner card | toner card readings |
Pixel number (*10000) | pixels the machine has printed (*10000) |
Counter TONER | toner remaining in toner units |
Before you start, position the Soft-switch 1 bit n°8 to 1.
Attention
UNDOCUMENTED FUNCTIONS ARE RESERVED.
DO NOT TRY AND USE FUNCTIONS THAT ARE NOT DOCUMENTED IN THIS SECTION, THIS MAY LEAD TO THE PERMANENT LOSS OF DATA.
- Printing all parameters (including installation and technical parameters):
▼ [*] [1] - Switching to forced standby mode regardless of the clock:
▼ [*] [2] - Switching to software download via a computer link:
▼ [*] [4] - Save the parameters on I2C card:
▼ [*] [5]
Attention - ALL DATA PRESENT ON THE I2C CARD PRIOR TO THE OPERATION WILL BE LOST AFTER OPERATION AND REPLACED BY PARAMETERS FROM THE MACHINE.