OKI MB260MFP

Each one of the administrator functions described here can be accessed via a specific succession of keys.

The alphabetic keys are available via the navigation keys ▲ and ▼ via the keyboard.
For example, to enter a sequence ▼* A (launching scanner tuning):

1. Press the following key ▼.
2. Press the following key *
3. Press ▼ to display all the options available until you reach A.
   Confirm your choice with OK.

INITIALIZING AND ERASING MEMORY

Before you start, set the 8 bit parameter installation configuration 1 to 1.

Attention
UNDOCUMENTED FUNCTIONS ARE RESERVED.

DO NOT TRY AND USE FUNCTIONS THAT ARE NOT DOCUMENTED IN THIS SECTION, THIS MAY LEAD TO THE PERMANENT LOSS OF DATA.

Attention
USE OF THESE LISTED FUNCTIONS WILL LEAD TO THE PERMANENT LOSS OF DOCUMENTS AND PARAMETERS ON THE MACHINE.

• Reset all parameters (user, installer or technical) to the default configuration (factory configuration):
  ▼ [#] [0]
• Erase the printer counters:
  ▼ [#] [3]
• Reinitialize the flash data (erases all):open the printer front door then:
  ▼ [#] [5]
• Erase all. Reset to default configuration (combination of functions 0 and 8):
  ▼ [#] [7]
• Erase all documents stored in memory:
  ▼ [#] [8]
• Erase the first element of the printer queue:
  ▼ [#] [I]
• Erase Printer Error:
  ▼ [#] [T]

Then switch ON/OFF the machine.