OKI ES5473MFP
Self-diagnostic mode. 1. How to Enter
Note!
Entering the System Maintenance mode requires a password. Maintenance Menu for description on it. Following description is explained in the case of MC573 as an example.
- Select the "Device Settings" by touch panel.
- Enter [#] → [0] → [1] → [0] → [3] → [*] at "Device Settings" display.
- Enter the password "000000" and touch [OK] button.
- Select the "Print Maintenance" → "Engine Diag Mode"
Exiting self-diagnostic mode
1. When the [d] ([4]) is pressed from Diag Mode (Window displaying/Factory state), the setting window will return.