OKI C844dnwl

For maintenance personnel

This menu is activated by holding down
[BACK], [ENTER] and [ONLINE] buttons
at the apparatus status in standby and then enter the password.

Initial Password: 000000

Item (1st Line)	Value (2nd Line)	Functions
Enter Password	************	Enter a password to enter System Maintenance menu. The default value is "000000" From 6 to 12 digits of alphanumeric characters to input.
Save Syslog	Execute	Save the network communication log(syslog) to nonvolatile memory
Print Syslog	Execute	Print the network communication log(syslog)
Condition Log size	20 50 100 500	Sets the number of errors per CSV error log to be returned using an HTTP. Sends back CSV error logs containing errors subsequent to the latest error by the number that is set with this menu. Default: 20 errors
Adminpassword Reset	Execute	Resetting the administrator password to the factory default value "123456". Display the following confirmation message when push the [ENTER] button. ARE YOU SURE? YES/NO When NO is chosen, return to previous menu indication. When YES is chosen, execute initialization.
New Parts Keep Mode	Execute	Check for the operation while changing the supplies during keeping the power ON. The check mode will finish and invalid if turning the power ON.
Engine Status	Execute	Prints engine information.
Engine Diag Mode		Enters self-diagnosis mode of the engine.
Power Save	Enable Disable	Sets Enable/Disable of Power Save Mode.
Sleep	Enable Disable	Sets Enable/Disable of Deep Sleep Mode.
Change Password
New Password	************	Sets a new password to enter "System Maintenance" menu From 6 to 12 digits of alphanumeric characters can be enter.
Verify Password	************	Input the new password to enter "System Maintenance" menu which is set by "New Password" for confirmation. From 6 to 12 digits of alphanumeric characters can be enter.