OKI C532dn
Troubleshooting. 2.3 Abnormal sound
3.1 Checking for loss of synchronization of motor (driver failure)
Check item | Checking method | Action in case of NG |
---|---|---|
Operation of each motor | Check whether each motor operates properly using the selfdiagnosis mode. Check by detection of a load. Noise that sounds like "pooh" is made when there is a fault. |
Replace CU/PU board and SU board. |
Condition of each motor cable | Check the wiring of each motor. Check for a short circuit by visual check and using a tester. Disconnect the motor cable from the PCB and check the resistance between the FG and each pin of the disconnected cable. |
Replace the motor cable. Correct the wiring. |
3.2 Checking for loss of synchronization of motor (load by consumables)
Check item | Checking method | Action in case of NG |
---|---|---|
Operation of each motor | Check whether each motor operates properly using the selfdiagnosis mode. Check by detection of a load. Noise that sounds like "pooh" is made when there is a fault. |
Replace the consumable(s). |
3.3 Check for gear jumping (load by consumables)
Check item | Checking method | Action in case of NG |
---|---|---|
Operation of each motor | Check whether each motor operates properly using the selfdiagnosis mode. Check by detection of a load. Noise that sounds like "batz batz" is made when there is a fault. |
Replace the consumable(s). |
Position of consumables | Check visually whether each consumable gear is in place and they engage with one another. | Replace or repair mechanical part(s). |
3.4 Checking cable wiring
Check item | Checking method | Action in case of NG |
---|---|---|
Cable wiring around cooling fans | Check whether a cable touches the blades of a fan as the cable is not properly laid. When it does, noise that sounds like "clack clack" is made. |
Lay the cable properly. |