OKI C130
Troubleshooting. Jam. Misfeed at exit section
Detection timing
| Type | Description |
|---|---|
| Detection of misfeed at exit section | The exit sensor (PS4) is not unblocked even after the lapse of a predetermined period of time after it has been blocked by the media. |
| Detection of media left in exit section | The exit sensor (PS4) is blocked when the power switch is turned ON, a cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Exit sensor (PS4)
Printer control board (PRCB)
Action
| Step | Action | Control signal | Location |
|---|---|---|---|
| 1 | Initial check items | ||
| 2 | Check the PRCB connector for proper connection and correct as necessary. | ||
| 3 | PS4 sensor check. | PRCB PJ6-3 (ON) | C110: B to C-6 C130n: C-6 |
| 4 | Change PRCB. |