OKI C130
Troubleshooting. Jam. Misfeed at fusing section
Detection timing
Type | Description |
---|---|
Detection of misfeed at fusing section | The media does not block the exit sensor (PS4) even after the lapse of a predetermined period of time after the registration roller solenoid (SD2) has been energized. |
The exit sensor (PS4) is unblocked within a predetermined period of time after it has been blocked by the media. | |
The transport motor, polygon motor, and rack motor are energized even after the lapse of a predetermined period of time after media information has been created. | |
Detection of media left in fusing section | The exit sensor (PS4) is blocked when the power switch is turned ON, a cover is opened and closed, or a misfeed or malfunction is reset. |
Relevant electrical parts
Exit sensor (PS4)
Registration roller solenoid (SD2)
Printer control board (PRCB)
MFP board (MFPB)
Action
Step | Action | Control signal | Location |
---|---|---|---|
1 | Initial check items | ||
2 | Check the MFPB connector for proper connection and correct as necessary. | ||
3 | Check the PRCB connector for proper connection and correct as necessary | ||
4 | PS4 sensor check. | PRCB PJ6-3 (ON) | C110: B to C-6 C130n: C-6 |
5 | SD2 operation check. | PRCB PJ10-4 (REM) | C110: C-9 to 10 C130n: C-9 |
6 | Change MFPB. | ||
7 | Change PRCB. |