OKI C130
Troubleshooting. List of control panel messages C130
Error messages
| Message | Description |
|---|---|
| CHECK TRAY1 PAPER (Displaying alternately)) PRESS ENTER |
• Tray 1 is media empty. • Media has misfed in Tray 1. |
| I/C LIFE END | • The imaging cartridge has reached the end of its life. |
| AUTH TIMEOUT | • The user is automatically logged off due to IEEE802.1x port authorization. |
| AIDC ERROR | • The AIDC sensor has developed a malfunction of some sort. |
| BELT ERROR | • The printer detected incorrect image position on the image transfer belt. |
| DUPLEX UNIT PANEL OPEN | • The duplex option cover is open. |
| ERROR LOADING IMAGE | • While updating code, an error has occurred. |
| TOP COVER OPEN | • The top cover of the machine is open. |
| PAPER JAM XXXX | • A media jam has occurred at the specified location. |
| PUT “SIZE” “TYPE” IN TRAY 1 | • The media size set from the printer driver is different from the size of media loaded in Tray 1. NOTE • Load the correct paper on Tray1, and press the ENTER key, then specify the [SIZE] and [TYPE] of the paper. |
| PUT “SIZE” “TYPE” IN TRAY 2 | • The media size set from the printer driver is different from the size of media loaded in Tray 2. NOTE • This message appears when [MAIN MENU] → [PAPER MENU] → [INPUT TRAY] → [AUTO CONTINUE] is set to [OFF]. |
| X TONER LIFE END REPLACE X | • The X toner cartridge has reached the end of its life. |
| X TONER MISSING | • The specified color of toner cartridge is not installed. |
| X TONER OUT | • The specified color of toner cartridge is empty. NOTE • Appears when [MAIN MENU] → [QUALITY MENU] → [TONER OUT ACTION] is set to [CONTINUE]. |
Malfunction messages
| Message | Description |
|---|---|
| FIRMWARE UPDATE WRITING ERROR | • Data cannot be written since the flash memory is damaged. |
| SERVICECALL XX | • The engine or controller is faulty. |