OKI C130

Procedure

Press the following key in this order

1. Press the [Tab] key.
2. Press the [Alt] key + [a] key.
3. Input the “sysADMIN”.

A. Toner Low

Function:
• Specifies whether a printer indicator blinks or a warning message appears in the status display box of the Remote Panel Utility when toner is about to run out. If Off is selected, neither of these notifications appear when the toner is about to run out.

Adjustment Range:
• The default setting is
On. “On” / Off

B. I/C Low

Function
• Specifies whether a printer indicator blinks or a warning message appears in the status display box of the Remote Panel Utility when imaging cartridge is about to run out. If Off is selected, neither of these notifications appear when the imaging cartridge is about to run out.

Adjustment Range
• The default setting is On.
“On” / Off

Temperature

Function
• To adjust the fusing heating temperature individually for each paper type so as to ensure good fusing performance that varies with varying environmental conditions.

Use
• When fusing performance is poor, or wax streak or offset occurs when the type of paper is changed or environmental conditions change.
• Use this function when curled paper, or paper misfeed as a result of the curled paper, occurs under varying environmental conditions or depending on the type of paper used

Range
• The default setting is 0.
Plain Paper: -10 / -5 / “0”
Thick Paper: -10 / -5 / “0”
ENVELOPE: -10 / -5 / “0”

BK Clear

Function
• To clear engine information backup data

Use
• Execute this function to synchronize data when the MFP board or the printer control board is replaced with a new one.

A. Fuser Unit

Function
• Resets the fuser unit counter.

Use
• To use when the fuser unit has been replaced.

B. Transfer Roller

Function
• Resets the transfer roller counter.

Use
• To use when the transfer roller has been replaced.

Download

Function
To download the service data shown below from the printer.

Use
• Enable Warning: To set whether to display Toner low or I/C low.
• Temperature: Displays the set fuser temperature of each paper.
• Jam Counter: Displays the number of misfeeds that have occurred.
• Trouble Counter: Displays the number of malfunctions detected.
• Transfer Belt: Displays the remaining life of the transfer belt as a percentage.
• Fuser Unit: Displays the remaining life of the fuser unit as a percentage.
• Transfer Roller: Displays the remaining life of the transfer roller as a percentage.
• Drum Unit: Displays the remaining life of the imaging cartridge as a percentage

Upload

Function
• To upload the set data shown below to the printer.

Use
• Enable Warning: To set whether to display Toner low or I/C low.
• Temperature: Displays the set fusion temperature of each paper.