OKI B721

System maintenance menu (For maintenance personnel)

This menu is activated when the back ◄ and <ENTER> and <ON LINE> buttons are held down for 5 seconds while the printer is ready to print.

The menu is displayed in English irrespective of the destination of the product.

Maintenance menu display table

Item (1st Line)	Value (2nd Line	Functions
Enter Password	****** ******	Enters a password to enter the system maintenance menu. The default is “000000”. From 6 to 12 digits of number or Roman character can be enter
Save Syslog	Execute	Save network communication log(syslog) to flash rom.
Print Syslog	Execute	Print the saved network communication log(syslog).
Engine Diag Mode	Execute	It will be ONLINE by pressing ENTER key which issues the command from CU to PU. Check for the operation while changing the factories supplies during keeping the power ON. A new fuse will not cut and the countoperation will not be included in the old value). The check mode will finish and invalid if turing the power ON.
Engine Diag Mode		Enters self-diagnosis mode of the engine.
Change Password		Displays menus to change a password.
New Password	****** ******	Sets a new password to enter "System Maintenance" menu From 6 to 12 digits of number or Roman character can be enter.
Verify Password	****** ******	Makes User input the new password to enter "System Maintenance" menu which is set by "New Password" for confirmation. From 6 to 12 digits of number or Roman character can be enter.