OKI B431
Maintenance Mode. Admin Menu
Category and function of maintenance mode
- Maintenance mode can be divided into User maintenance mode that is released to user, Engine Maintenance Mode and System Maintenance Mode that are not released to user but for the only use of maintenance personnel.
- To view each category, push the button of "MENU " and "MENU ". After the screen displays the last category, the display returns to the first category.
- If want the displayed function to be effective, push the "OK" button.
- For terminating the mode that is in category displaying, push the key of "ON LINE" and return to operation mode.
User maintenance mode (Administrator Menu)
To open Administrator Menu, switch the power on while holding down the "OK" button.
After the category has been displayed, let go of the button "OK".
Administrator Menu has the following function.
| Setting item (Upper case) | Setting item (Lower case) | Function |
|---|---|---|
| ALL CATEGORY | ENABLE DISABLE |
Sets category ALL Enable/Disable of user menu. If set to invalidation, user menu wont to be display. The following setting item is not displayed if it is invalid. When doing panel lock, must invalidate this menu. |
| INFORMATION MENU | ENABLE DISABLE |
Setting validation / Invalidation of INFORMATION MENU category. If invalidate it the INFORMATION MENU category of user menu is not displayed. |
| SHUTDOWN MENU | ENABLE DISABLE |
Set Category SHUTDOWN MENU Enable/Disable. Set to Disable, Category SHUTDOWN MENU of user menu is not displayed. |
| PRINT MENU | ENABLE DISABLE |
Set Category PRINT MENU Enable/Disable. Set to Disable, Category PRINT MENU of user menu is not displayed. |
| MEDIA MENU | ENABLE DISABLE |
Set Category MEDIA MENU Enable/Disable. Set to Disable, Category MEDIA MENU of user menu is not displayed. |
| SYS CONFIG MENU | ENABLE DISABLE | Set Category SYSTEM CONFIG MENU Enable/Disable. Set to Disable, Category SYSTEM CONFIG MENU of user menu is not displayed. |
| PCL EMULATION | ENABLE DISABLE |
Set Category PCL EMULATION MENU Enable/Disable. Set to Disable, Category PCL EMULATION MENU of user menu is not displayed. |
| PPR EMULATION | ENABLE DISABLE |
Set Category PPR EMULATION MENU Enable/Disable. Set to Disable, Category PPR EMULATION MENU of user menu is not displayed. Except Japan Oriented. [Display Condition] "SYSTEM MAINTENANCE"-"PERSONALITY"-"IBM PPR III XL" is Enable. |
| FX EMULATION | ENABLE DISABLE |
Set Category FX EMULATION MENU Enable/Disable. Set to Disable, Category FX EMULATION MENU of user menu is not displayed. Except Japan Oriented. [Display Condition] "SYSTEM MAINTENANCE"-"PERSONALITY"-"EPSON FX" is Enable. |
| ESC/P EMULATION | ENABLE DISABLE |
Set Category ESC/P MENU Enable/Disable. Set to Disable, Category ESC/P MENU of user menu is not displayed. Only displayed as Japan domestic oriented. [Display Condition] "SYSTEM MAINTENANCE"-"PERSONALITY"-"ESC/P" is Enable. |
| PARALLEL MENU | ENABLE DISABLE |
Set Category PARALLEL MENU Enable/Disable. Set to Disable, Category PARALLEL MENU of user menu is not displayed. |
| USB MENU | ENABLE DISABLE |
Set Category USB MENU Enable/Disable. Set to Disable, Category USB MENU of user menu is not displayed. |
| NETWORK MENU | ENABLE DISABLE |
Set Category NETWORK MENU Enable/Disable. Set to Disable, Category NETWORK MENU of user menu is not displayed. [Display Condition] NIC full assembled |
| MEMORY MENU | ENABLE DISABLE |
Set Category MEMORY MENU Enable/Disable. Set to Disable, Category MEMORY MENU OF user menu is not displayed. |
| SYS ADJUST MENU | ENABLE DISABLE |
Set Category SYS ADJUST MENU Enable/Disable. Set to Disable, Category SYS ADJUST MENU of user menu is not displayed. |
| MAINTENANCE MENU | ENABLE DISABLE |
Set Category MAINTENANCE MENU Enable/Disable. Set to Disable, Category MAINTENANCE MENU of user menu is not displayed. |
| USAGE MENU | ENABLE DISABLE |
Set Category USAGE MENU Enable/Disable. Set to Disable, Category USAGE MENU of user menu is not displayed. |
| MENU LOCKOUT (*1) | ENABLE DISABLE |
Set Function MENU LOCKOUT Enable/Disable. Set to Disable, Category PASSWORD, Category CHANGE PASSWORD of user menu is not displayed. The Initial Value of PASSWORD is "aaaa". |
| PANEL LOCKOUT (*1) | ENABLE DISABLE |
Set Function PANEL LOCKOUT Enable/Disable. Set to Enable, on the panel only "ONLINE" switch is Enable, it is not able to display MENU. |