OKI B420

Category and function of maintenance mode

• Maintenance mode can be divided into User maintenance mode that is released to user, Engine Maintenance Mode and System Maintenance Mode that are not released to user but for the only use of maintenance personnel.
• For renewing each category, push the button of "MENU▲" and "MENU▼" . After renewing the last category, it returns to the initial category.
• If want the displayed function to be effective, push the [SETUP] button.
• For terminating the mode that is in category displaying, push the key of [ON LINE] and return to operation mode.

User maintenance mode (Administrator Menu)

For Administrator Menu, push the button of [SETUP] and power Switch simultaneously. After the category has been displayed, let go of the button "SETUP". Administrator Menu has the following function.

Category	Operation panel display		Default value	Function * Only English is supported for panel display
	Setting item (Upper case)	Setting item (Lower case)
OP MENU	ALL CATEGORY	ENABLE DISABLE	*	Sets category ALL Enable/Disable of User Menu. If set to invalidation, user menu wont to be display. The following setting item is not displayed if it is invalid. When doing panel lock, must invalidate this menu.
	INFORMATION MENU	ENABLE DISABLE	*	ISetting validation / Invalidation of INFORMATION MENU category. If invalidate it the INFORMATION MENU category of user menu is not displayed.
	SHUTDOWN MENU	ENABLE DISABLE	*	Set Category SHUTDOWN MENU Enable/Disable. Set to Disable, Category SHUTDOWN MENU of User Menu is not displayed.
	PRINT MENU	ENABLE DISABLE	*	Set Category PRINT MENU Enable/Disable. Set to Disable, Category PRINT MENU of User Menu is not displayed.
	MEDIA MENU	ENABLE DISABLE	*	Set Category MEDIA MENU Enable/Disable. Set to Disable, Category MEDIA MENU of User Menu is not displayed.
	SYS CONFIG MENU	ENABLE DISABLE	*	Set Category SYSTEM CONFIG MENU Enable/ Disable. Set to Disable, Category SYSTEM CONFIG MENU OF User Menu is not displayed.
	PCL EMULATION	ENABLE DISABLE	*	Set Category PCL EMULATION MENU Enable/ Disable. Set to Disable, Category PCL EMULATION MENU of User Menu is not displayed.
	PPR EMULATION	ENABLE DISABLE	*	Set Category PPR EMULATION MENU Enable/ Disable. Set to Disable, Category PPR EMULATION MENU of User Menu is not displayed. Except Japan Oriented. [Display Condition] "SYSTEM MAINTENANCE"-"PERSONALITY"-"IBM PPR III XL" is ENABLE.
OP MENU	FX EMULATION	ENABLE DISABLE	*	Set Category FX EMULATION MENU ENABLE/ DISABLE. Set to DISABLE, Category FX EMULATION MENU of User Menu is not displayed. Except Japan Oriented. [Display Condition] "SYSTEM MAINTENANCE"-"PERSONALITY"- "EPSON FX" is ENABLE.
	ESC/P EMULATION	ENABLE DISABLE	*	Set Category ESC/P MENU ENABLE/DISABLE. Set to DISABLE, Category ESC/P MENU of User Menu is not displayed. Only displayed as Japan domestic oriented. [Display Condition] "SYSTEM MAINTENANCE"-"PERSONALITY"-"ESC/ P" is ENABLE.
	PARALLEL MENU	ENABLE DISABLE	*	Set Category PARALLEL MENU ENABLE/DISABLE. Set to DISABLE, Category PARALLEL MENU of User Menu is not displayed.
	USB MENU	ENABLE DISABLE	*	Set Category USB MENU ENABLE/DISABLE. Set to DISABLE, Category USB MENU of User Menu is not displayed.
	NETWORK MENU	ENABLE DISABLE	*	Set Category NETWORK MENU ENABLE/DISABLE. Set to DISABLE, Category NETWORK MENU of User Menu is not displayed. [Display Condition] NIC full assembled
	MEMORY MENU	ENABLE DISABLE	*	Set Category MEMORY MENU ENABLE/DISABLE. Set to DISABLE, Category MEMORY MENU OF User Menu is not displayed.
	SYS ADJUST MENU	ENABLE DISABLE	*	Set Category SYS ADJUST MENU ENABLE/ DISABLE. Set to DISABLE, Category SYS ADJUST MENU of User Menu is not displayed.
	MAINTENANCE MENU	ENABLE DISABLE	*	Set Category MAINTENANCE MENU ENABLE/ DISABLE. Set to DISABLE, Category MAINTENANCE MENU of User Menu is not displayed.
	USAGE MENU	ENABLE DISABLE	*	Set Category USAGE MENU ENABLE/DISABLE. Set to DISABLE, Category USAGE MENU of User Menu is not displayed.
	MENU LOCKOUT	ENABLE DISABLE	*	Set Function MENU LOCKOUT ENABLE/DISABLE. Set to DISABLE, Category PASSWORD, Category CHANGE PASSWORD of User Menu is not displayed. The Initial Value of PASSWORD is "aaaa".
	PANEL LOCKOUT	ENABLE DISABLE	*	Set Function PANEL LOCKOUT ENABLE/DISABLE. Set to ENABLE, on the panel only "ONLINE" switch is ENABLE, it is not able to display MENU.
FILE SYS MAINTE1	FLASH INITIALIZE	EXECUTE	-	Initialize resident FLASH. Press Enter switch then the following confirming message is displayed. ARE YOU SURE? EXECUTE OR NOT? YES / NO     YES / NO If NO is chosen, it returns to the previous menu display. If YES is chosen, it reboots automatically and executes the initialization of Flash Memory. [Display condition] "ADMIN MENU"-"FILE SYS MAINTE2"-"INITIAL LOCK" is NO.
FILE SYS MAINTE2	INITIAL LOCK	YES NO	*	Do not allow to modify setting accompanied by the initialization of Block Device (FLASH). If set this menu to YES, item "ADMIN MENU", "FILE SYS MAINTE1" is not displayed on the operation panel. [Display condition] "PRINT ACCUMULATING"-"ACCUMULATING RESULT PRINT" of User Menu is DISABLE.
PS MENU	L1 TRAY	TYPE1 TYPE2	*	As setting TYPE 1, the selecting number of level 1 operator tray is enable from 1, yet it is from 0 as setting TYPE 2, Only B430/B440 series is displayed.
SIDM	SIDM MANUAL	0	*J	Set Pn specified by MANUAL in CSF CONTROL
MENU	ID#	~		CONMENT OF MANUAL-1 ID No.FX/PPR/ESCP
		2	*E	Emu(ESC EM Pn).
		~		Default value: Japan oriented is "0", Except Japan
		9		oriented is "2".
	SIDM MANUAL	0	*	Set Pn specified by MANUAL in CSF CONTROL
	2 ID#	~		CONMENT OF MANUAL-2 ID No.FX/PPR/ESCP
		3		Emu(ESC EM Pn).
		~
		9
	SIDM MP TRAY	0	*	Set Pn specified by TRAYO (mp Tray) in the MP Tray
	ID#	~		ID No. FX/PPR Emu (ESC EM Pn).
		4		Only B430/B440 series is displayed.
		~
		9
	SIDM TRAY1 ID#	0 1 ~ 9	*	Set Pn specified by TRAY 1 in CSF CONTROL DEMMAND of Tray 1 ID No. FX/PPR/ESCP Emu (ESC EM Pn).
	SIDM TRAY2 ID#	0 ~ 2 ~ 5 ~ 9	*J *E	Set Pn specified by TRAY 1 in CSF CONTROL DEMMAND (ESC EM Pn) of Tray 2 ID No.FX/PPR/ ESCP Emu. Default Value: Japan oriented is "2", Except Japan oriented is 5. [Display condition] Tray 2 implementation
LANGUAGE MENU	LANG INITIALIZE	EXECUTE	-	Initialize (Delete) LED message file that is loaded on FLASH. Press Enter switch then the following message is displayed. ARE YOU SURE? YES / NO If NO is selected, return to original MENU display. If YES is selected, immediately remove the MENU and starts to delete operation after reboot. Only support Multi-language model.