Lexmark XM7170
Maintenance. Replacing fuser kits
The operator panel displays the message 80 “Replace maintenance kit” at required maintenance intervals. You must replace the fuser, transfer roller, pick roller, and separation roller at this interval to maintain the print quality and reliability of the printer. The following fuser maintenance kits are available:
| Description | Part number | Maintenance interval |
|---|---|---|
| Roller Kit Note: The roller kit will only be needed in situations where the fuser does not reach the rated life (200K). When the fuser is replaced before reaching 200K, the fuser maintenance count is reset to zero, while the roller maintenance count continues. When the roller maintenance count reaches 300K, a message will be displayed to replace the Roller kit. |
40X7706 | 300K |
| MS81x Return Program Fuser Maintenance Kit Type 00, 110-120V Letter | 40X8420 | 200K |
| MS81x Return Program Fuser Maintenance Kit Type 01, 220-240V A4 | 40X8421 | 200K |
| MS81x Return Program Fuser Maintenance Kit Type 02, 100V A4 | 40X8422 | 200K |
| MS81x Return Program Fuser Maintenance Kit Type 03, 110-120V A4 | 40X8423 | 200K |
| MS81x Return Program Fuser Maintenance Kit Type 04, 220-240V Letter | 40X8424 | 200K |
| MS81x Fuser Maintenance Kit Type 05, 110-120V Letter | 40X8425 | 200K |
| MS81x Fuser Maintenance Kit Type 06, 220-240V A4 | 40X8426 | 200K |
| MS81x Fuser Maintenance Kit Type 07, 100V A4 | 40X8427 | 200K |
| MS81x Fuser Maintenance Kit Type 08, 110-120V A4 | 40X8428 | 200K |
| MS81x Fuser Maintenance Kit Type 09, 220-240V Letter | 40X8429 | 200K |
| MX71x and MX81x ADF Maintenance Kit | 40X8431 | 120K |
The maintenance kits are compatible with the MX71x and MX81x series printers.
After replacing the maintenance kit, the maintenance count will automatically be reset to zero to clear the 80 “Replace maintenance kit” message.
Identifying the type of fuser used in the printer
From the front of the machine:
- Open the front cover.
- Remove the cartridge and imaging unit.
- On the EP frame, see the number in the area
From the rear of the machine:
- Remove the rear upper cover.
- Pull down the redrive.
- See the number in the area
Resetting the Roller Kit counter
After replacing a roller kit, the roller kit counter must be reset to zero to clear the “81 Replace Roller kit” message.
To reset the maintenance count:
- Turn off the printer.
- Enter the Configuration Menu.
a Press and hold the 2 and 6 buttons simultaneously.
b Turn on the printer.
c Release the buttons after 10 seconds. The Configuration Menu appears on the LCD. - Touch Reset Roller Kit Counter from the Configuration Menu.
- From the options displayed, select the roller kit to reset.
- Touch Yes to reset the roller kit counter value. Touch No or Back to return to the previous menu.
The roller kit count resets to zero, and the LCD returns to the Configuration Menu.