Lexmark XM7163
Maintenance. Inspection guide
The purpose of this inspection guide is to aid you in identifying the intervals, based on page count, at which parts must be inspected (for visible physical damage), cleaned, or replaced.
If any unsafe conditions exist, find out how serious the hazard could be and if you can continue before you correct the hazard.
As you service the machine, check for the following:
- Damaged, missing, or altered parts, especially in the area of the On/Off switch and the power supply
- Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover
- Possible safety exposure from any non-Lexmark attachments
Use the following tables to determine when specified parts should be inspected:
Lexmark MX81x | EVERY SERVICE CALL | EVERY 200K | NOTES |
---|---|---|---|
Media tray - All | |||
Media tray side guides | inspect | inspect | Check for correct positioning |
Media tray length guides | inspect | inspect | Check for correct positioning |
Separation roller | inspect, clean if needed | Replace | Clean with damp cloth |
Tray lift gear assembly | inspect | inspect | Ensure correct operation |
Transfer roller | inspect | Replace | Ensure correct installation |
Fuser | inspect | Replace | Ensure correct installation |
Media feeders - All | |||
Media tray pick roller | inspect, clean if needed | Replace | Clean with a damp cloth |
MPF pick roller | inspect, clean if needed | inspect, clean if needed | Clean with a damp cloth |
Covers and doors | |||
Rear door | inspect | inspect | Ensure correct operation and closure |
Fuser access door | inspect | inspect | Ensure correct operation and closure |
Paper path | |||
Duplex path | inspect | inspect | Check for media fragments and tears |
Miscellaneous | |||
Toner spillage | clean | clean | Remove all toner spillage from the printer |
Lexmark MX71x | EVERY SERVICE CALL | EVERY 200K | NOTES |
---|---|---|---|
Media tray - All | |||
Media tray side guides | inspect | inspect | Check for correct positioning |
Media tray length guides | inspect | inspect | Check for correct positioning |
Separation roller | inspect, clean if needed | Replace | Clean with damp cloth |
Tray lift gear assembly | inspect | inspect | Ensure correct operation |
Media feeders - All | |||
Media tray pick roller | inspect, clean if needed | Replace | Clean with a damp cloth |
MPF pick roller | inspect, clean if needed | inspect, clean if needed | Clean with a damp cloth |
Transfer roller | inspect | Replace | Ensure correct installation |
Fuser | inspect | Replace | Ensure correct installation |
Covers and doors | |||
Rear door | inspect | inspect | Ensure correct operation |
Fuser access door | inspect | inspect | Ensure correct operation and closure |
Paper path | |||
Duplex path | inspect | inspect | Ensure media fragments and tears are not present |
Miscellaneous | |||
Toner spillage | clean | clean | Remove all toner spillage from the printer |