Lexmark XM5163

The purpose of this inspection guide is to aid you in identifying the intervals, based on page count, at which parts must be inspected (for visible physical damage), cleaned, or replaced.

If any unsafe conditions exist, find out how serious the hazard could be and if you can continue before you correct the hazard.

As you service the machine, check for the following:

• Damaged, missing, or altered parts, especially in the area of the On/Off switch and the power supply
• Damaged, missing, or altered covers, especially in the area of the top cover and the power supply cover
• Possible safety exposure from any non-Lexmark attachments

Use the following tables to determine when specified parts should be inspected:

Lexmark MX81x	EVERY SERVICE CALL	EVERY 200K	NOTES
Media tray - All
Media tray side guides	inspect	inspect	Check for correct positioning
Media tray length guides	inspect	inspect	Check for correct positioning
Separation roller	inspect, clean if needed	Replace	Clean with damp cloth
Tray lift gear assembly	inspect	inspect	Ensure correct operation
Transfer roller	inspect	Replace	Ensure correct installation
Fuser	inspect	Replace	Ensure correct installation
Media feeders - All
Media tray pick roller	inspect, clean if needed	Replace	Clean with a damp cloth
MPF pick roller	inspect, clean if needed	inspect, clean if needed	Clean with a damp cloth
Covers and doors
Rear door	inspect	inspect	Ensure correct operation and closure
Fuser access door	inspect	inspect	Ensure correct operation and closure
Paper path
Duplex path	inspect	inspect	Check for media fragments and tears
Miscellaneous
Toner spillage	clean	clean	Remove all toner spillage from the printer

 

Lexmark MX71x	EVERY SERVICE CALL	EVERY 200K	NOTES
Media tray - All
Media tray side guides	inspect	inspect	Check for correct positioning
Media tray length guides	inspect	inspect	Check for correct positioning
Separation roller	inspect, clean if needed	Replace	Clean with damp cloth
Tray lift gear assembly	inspect	inspect	Ensure correct operation
Media feeders - All
Media tray pick roller	inspect, clean if needed	Replace	Clean with a damp cloth
MPF pick roller	inspect, clean if needed	inspect, clean if needed	Clean with a damp cloth
Transfer roller	inspect	Replace	Ensure correct installation
Fuser	inspect	Replace	Ensure correct installation
Covers and doors
Rear door	inspect	inspect	Ensure correct operation
Fuser access door	inspect	inspect	Ensure correct operation and closure
Paper path
Duplex path	inspect	inspect	Ensure media fragments and tears are not present
Miscellaneous
Toner spillage	clean	clean	Remove all toner spillage from the printer